Surface milling tools

Particularly öeconomic face milling tool for roughing and finishing of steel, stainless steel and cast iron. This generation of face milling tools convinces due to the high number of cutting edges and the soft cut through the effectively positive rake angle and offers highest productivity on medium and large machines. Axial infeed max. 6.7mm with effectively 8 cutting edges.

The different numbers of teeth of the attachable milling cutters allow the optimum selection for the necessary machining processes. The inserts are available in different grades, optimally adapted to the material to be machined. A wide finishing plate is also available. Translated with DeepL

Particularly economical face milling tool for roughing and finishing of steel, stainless steel and cast iron. Highest productivity on small and medium machines, axial infeed max. 3.5mm with effectively 8 cutting edges. The program consists of arbors and shanks in different diameters and in close and wide pitch. The different numbers of teeth allow the optimum selection for the necessary
machining processes. The inserts are available in different grades, optimally adapted to the material to be machined. A wide finishing insert is also available. Translated with DeepL

The round insert milling system consisting of different tool types and different insert types. This offers enormous flexibility. Attachment mills are available in the diameter range from 40mm to 125mm. The shank milling cutters are designed according to DIN 1835-B (Weldon) and are available in diameters ranging from 28mm to 40mm and with two different shank diameters. The range also includes screw-in milling cutters, which are available in diameters of 28mm, 32mm and 40mm. The effective 8-flute indexable inserts can be used with an axial infeed of up to 5mm.  The inserts are available in different qualities and can thus be optimally selected for the material to be machined. Translated with DeepL