506,518 active members
3,967 visitors online
Register for free
Login Register
Kemmerich Werkzeugmaschinen

Contact

Kemmerich Werkzeugmaschinen GmbH
Im Rottfeld 1a
40789 Monheim am Rhein
Germany
+49 2173 207474
+49 2173 207473

Route planner

Route planner

GLEASON 130 Curvic Coupling Grinder

Asking price


  • Reference number 1020-17737
    Manufacture Year 1985
    Operation Hours not applicable
  • Metal working machine
  • Gear Cutting Machines
  • BEVEL GEAR MACHINERY
  • Bevel Gear Grinders
  • GLEASON
  • FANUC 18 MB
  • max. wheel diameter
    1524 mm
    gear width
    - mm
    max. module
    -
    min. module
    -
    grinding wheel turining speeds
    1 - 3000 U/min
    grinding wheel size
    146 - 546 mm
    max. workpiece diameter
    1524 mm
    Control
    FANUC 18 MB
    w-axis
    27,69 mm
    z-axis
    88,9 - 698,5 mm
    U-axis
    50,8 - 546,1 mm
    feed:
    w-axis
    432 mm/min
    z-axis
    3632 mm/min
    b-axis
    2,5 °/sec
    total power requirement
    kW
    weight of the machine ca.
    17,5 t
    dimensions of the machine ca.
    4,4 x 3,98 x 3,7 m
  • 2000 retrofitted/modernized by Gleason with new CNC, Elektric, Drives/motors,
    Geometrie etc.
    Gleason Curvic Coupling Grinding Machines are high-speed large bore spindle
    machines for grinding curvic teeth in face couplings. A fully-automatic
    grinding cycle enables the production of extremely accurate and uniform
    couplings at high production rates.
    Couplings are roughed and finished from a solid blank in one machine setup.
    - CNC Control FANUC 18MB
    - CNC Indexer

    - Maximum Full Depth 9.5 mm
    - Maximum Diameter-Part 1,524 mm
    - Maximum Diameter-Coupling 914 mm
    - Maximum Shaft Diameter 304.8 mm
    - Maximum Shaft Length from Work Spindle Face(Longer Shafts Permissible based
    on Arbor Distance) 1397 mm
    - Index Range 1 -200
    - Work Spindle Diameter of Taper at Large End 586 mm
    - Work Spindle Taper per Foot 38 mm
    - Work Spindle Depth of Taper 16.5 mm
    - Work Spindle Diameter of Straight Bore (Front) 584 mm
    - Work Spindle Depth of Straight Bore 752 mm
    - Work Spindle Diameter (Rear) 311 mm
    - Axial Wheel Advance for Wheel Wear 50.8 mm


    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from Kemmerich Werkzeugmaschinen GmbH