502,733 active members
4,097 visitors online
Register for free
Login Register
Kemmerich Werkzeugmaschinen

Contact

Kemmerich Werkzeugmaschinen GmbH
Im Rottfeld 1a
40789 Monheim am Rhein
Germany
+49 2173 207474
+49 2173 207473

Route planner

Route planner

STANKO VSZ-103 NC

Asking price


  • Reference number 1020-17099
    Manufacture Year 2018
    Operation Hours not applicable
  • Metal working machine
  • Grinders
  • Internal Grinders
  • STANKO
  • LIR 540R
  • internal diameter
    500 mm
    grinding depth
    1300 mm
    swing diameter
    800 mm
    grinding diameter - internal
    100 - 500 mm
    internal grinding motor
    - kW
    spindle speeds
    24 - 240 mm/min
    spindle speeds (infinitely variable)
    6600 / 3700 / 2100 U/min
    max. dia. of grinding wheel
    300 mm
    workpiece length - max.
    3150 mm
    Control
    LIR-540R
    connected load
    kW
    weight
    16 t
    dimensions of the machine ca.
    6,1 x 3,4 x 2,1 m
  • 2018 overhauled/modernized:
    - Modernized hydraulics
    - new electrics (cabinet "RITTAL", components "ABB","Schneider-electric"),
    conforming to ISO9002 standard, replacement of the product's electric drive
    with a frequency drive (made in Japan, "Yaskawa"). The grinding wheel motor is
    equipped with a soft start system, a barograph is installed to indicate the
    load of the motors and a barograph to control the oil temperature. The control
    circuit is built using an intelligent relay "Schneider-electric".
    - to control the grinding process in two axes, a ruler and DRO LIR-540R are
    installed.

    equipped with:
    - Two internal grinding heads (fortune), lunette.
    According to customer requirements it is possible to manufacture additional
    fortunes and lunettes.
    - Diamter of the end of the grinding spindle according to GOST 2324-77, mm 25;50
    - Diameter of the sleeve of the grinding spindle, mm 120; 200
    - The conditional size of the end of the spindle of the product according to
    GOST 12595-72 1-15M
    - The length of grinding, depending on the diameters of the grinding holes, mm:
    -- 100-190 mm ... 450
    -- 200-340 mm ... 700
    -- 350-500 mm ... 1300
    - Distance from the table mirror to the axis of the product spindle, mm 610
    - Distance from the axis of the spindle to the base of the frame, mm 1465
    - The greatest distance from the support end of the flange of the spindle to
    the end of the grinding head, mm 3150
    - Limits of the values of discontinuous transverse feeding of the grinding
    wheel to the single table travel, mm 0.001-0.004
    - Transverse movement of the grinding wheel, mm:
    -- The greatest from the hydraulic cylinder ... 1,8
    -- One division of the limb ... 0.0025
    -- for one rolling of manual dosing lever ... 0.0025
    - The amount of compensation for the wear of the grinding wheel during the
    grinding cycle, mm:
    -- The greatest ... 0.2
    -- The smallest ... 0.02
    - The greatest course of the table, mm 1500
    - Speed of table movement, m / min:
    -- The smallest ... 0.2
    -- with a quick approach (withdrawal) ... 5
    - Moving the table in one turn of the flywheel of manual movement, mm 5,6



    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from Kemmerich Werkzeugmaschinen GmbH