Licon mt
Products
32
Licon mt GmbH & Co. KG
Horizontal machining centres
LiFLEX I 30168 DL B0
The LiFLEX I 30168 DL B0 single-spindle machining centre is designed for direct loading. It is particularly suitable for 4-axis machining. The X-work stroke is 3,000 mm.
Not "either or", but "both": LiFLEX machining centres have proved that they have proven dynamic stiffness with considerable dynamic values. This saves tool costs and offers optimum component quality. On the basis of the same LiFLEX basic architecture, various variants can be configured: e.g. HSK 63, HSK 100, different tool magazine sizes.
Configured as a directly loaded machine, it offers an economically very attractive solution. The machine architecture offers large machining areas and is therefore particularly suitable for high frame clamping fixtures, a big plus for complete machining in just one clamping operation.
Translated with DeepL
LiFLEX IV 244
|
No photo available
|
Horizontal machining centre
Licon mt GmbH & Co. KG
Horizontal machining centres
In the LiFLEX IV four-spindle machines, four LiFLEX motor spindles operate in a block set. To ensure that all four motor spindles behave in the same way during the cutting process, the dynamic behavior of the entire machine was optimized and the influences of the normal machining process were minimized. The identical prerequisites with regard to rigidity ensure a reduction in cycle time as well as a consistently high machining quality in continuous operation.
The LiFLEX IV 244 has travels of 225 / 470 / 420 mm in X / Y / Z as well as a cube of 600 mm in the A axis and cubbies of 224 mm in the B axis. Translated with DeepL
The LiFLEX IV 244 has travels of 225 / 470 / 420 mm in X / Y / Z as well as a cube of 600 mm in the A axis and cubbies of 224 mm in the B axis. Translated with DeepL
