The LiFLEX II 766 i PC B2 offers the best performance at a highly attractive price. Regardless of the complexity of the application, our 4- / 5-axis powerhouse with 5-sided machining and independant Z-axes leaves nothing to be desired. Particularly impressive is the high degree of rigidity and machining speed during simultaneous loading of this HSK-A100 machine, which is suitable for dry machining.
Strokes (mm) X 750 / Y 660 / Z 650
Spindle distance 750 mm
Tool shank HSK 63, HSK 100
Max. torque 85 … 500 Nm
Max. Speed 6000 … 16000 rpm
Pickup chain magazine 2 x 30 positions, optional 2 x 60 positions
Acceleration up to 9 m/s²
Rapid traverse rate up to 90 m/min
A-axis swing diameter 1060 mm
Suitable for wet and dry machining
In the LiFLEX IV four-spindle machines, four LiFLEX motor spindles operate in a block set. To ensure that all four motor spindles behave in the same way during the cutting process, the dynamic behavior of the entire machine was optimized and the influences of the normal machining process were minimized. The identical prerequisites with regard to rigidity ensure a reduction in cycle time as well as a consistently high machining quality in continuous operation.
The LiFLEX IV 244 has travels of 225 / 470 / 420 mm in X / Y / Z as well as a cube of 600 mm in the A axis and cubbies of 224 mm in the B axis.
Translated with DeepL
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.