NC TYPE
1.SERVO FEED SYSTEM
The saw frame up and down is controlled by a servo motor with ball screw and rigid linear guides to ensure high speed and high accuracy cutting performance.
2.SERVO FEEDRATE CONTROL
The cutting feed rate is controlled by a close feedback servo system for auto adjusting optimizing cutting. With this feature, faster cutting performance and much longer blade service life are easliy achieved.
3.AUTO-POSITIONING GUIDE ARM
The blade guide arm will be moved automatically to the right position according to the size of material.
4.RIGID ,WIDE SPEED RANGE GEAR BOX REDUCER
This newly developed gear box provides wide speed range (20-120M/min) for cutting most many different materials with much less noise.
5.EASY OPERATING TOUCH SCREEN CONTROL SYSTEM
By using a 5.7 inches touch screen control makes operation easier(human technology interface).
1. Power-driven blade cleaning brush and coolant cleaning flush hose.
2. Carbide guides suitable for bimetal and carbide tipped bands.
3. Hydraulic quick acting vise jaw for clamping.
4. Double vise jaws design, vise jaws clamp the material on both side of the saw blade.
5. Manual floating roller for feeding.
6. Hydraulic blade tension control.
7. Beam light to show blade cutting line.
1.Precise cut off length setting.
2.Auto head elevation and quick approach control.
3.Nesting fixture device for bundle cutting.
4.Cutting piece counter with auto-shut-off.
5.Multiple stroke counter for long pieces. (standard 9 times)
6.Power-driven blade cleaning brush and coolant cleaning flush hose.
7.Carbide and roller blade guides.
8.Hydraulic shuttle vice back-jaw feed method.
9. Hydraulic blade tension control.
10.Work-area light.
11.Automatic chip conveyor.
12.Two-way open rear vice jaws to ensure precise bar-feed repeatability even in cutting a little bit warped / surface rough works.
13.Unique split machine vice allows cutting to within as little as 50 mm of end automatically.
NEWEST MODEL NC TYP
1.SERVO FEED SYSTEM
The saw frame up and down is controlled by a servo motor with ball screw and rigid linear guides to ensure high speed and high accuracy cutting performance.
2.SERVO FEEDRATE CONTROL
The cutting feed rate is controlled by a close feedback servo system for auto adjusting optimizing cutting. With this feature, faster cutting performance and much longer blade service life are easliy achieved.
3.SERVO CUTTING TRANSMISSION
the speed of blade will be more stable with wider speed range for cutting different materials.
4.AUTO-POSITIONING GUIDE ARM
The blade guide arm will be moved automatically to the right position according to the size of material.
5.EASY OPERATING TOUCH SCREEN CONTROL SYSTEM
By using a 5.7 inches touch screen control makes operation easier(human technology interface).
1. Power-driven blade cleaning brush and coolant cleaning flush hose.
2. Carbide guides suitable for bimetal and carbide tipped bands.
3. Hydraulic quick acting vise jaw for clamping.
4. Double vise jaws design, vise jaws clamp the material on both side of the saw blade.
5. Manual floating roller for feeding.
6. Hydraulic blade tension control.
7. Beam light to show blade cutting line.
1.Precise cut off length setting.
2.Auto head elevation and quick approach control.
3.Nesting fixture device for bundle cutting.
4.Cutting piece counter with auto-shut-off.
5.Multiple stroke counter for long pieces. (standard 9 times)
6.Power-driven blade cleaning brush and coolant cleaning flush hose.
7.Carbide and roller blade guides.
8.Hydraulic shuttle vice back-jaw feed method.
9. Hydraulic blade tension control.
10.Work-area light.
11.Automatic chip conveyor.
12.Two-way open rear vice jaws to ensure precise bar-feed repeatability even in cutting a little bit warped / surface rough works.
13.Unique split machine vice allows cutting to within as little as 50 mm of end automatically.
1. Power-driven blade cleaning brush and coolant cleaning flush hose.
2. Idle wheel motion detector for blade jam/break shut-off.
3. Carbide guides suitable for bimetal and carbide tipped bands.
4. Hydraulic quick acting vise jaw for clamping.
5. Double vise jaws design, vise jaws clamp the material on both side of the saw blade.
6. Manual floating roller for feeding.
7. Hydraulic blade tension control.
8. Beam light to show blade cutting line.
1.Precise cut off length setting.
2.Auto head elevation and quick approach control.
3.Nesting fixture device for bundle cutting.
4.Cutting piece counter with auto-shut-off.
5.Multiple stroke counter for long pieces. (standard 9 times)
6.Power-driven blade cleaning brush and coolant cleaning flush hose.
7.Carbide and roller blade guides.
8.Hydraulic shuttle vice back-jaw feed method.
9. Hydraulic blade tension control.
10.Work-area light.
11.Automatic chip conveyor.
12.Two-way open rear vice jaws to ensure precise bar-feed repeatability even in cutting a little bit warped / surface rough works.
13.Unique split machine vice allows cutting to within as little as 50 mm of end automatically.
1. Power-driven blade cleaning brush and coolant cleaning flush hose.
2. Idle wheel motion detector for blade jam/break shut-off.
3. Carbide guides suitable for bimetal and carbide tipped bands.
4. Hydraulic quick acting vise jaw for clamping.
5. Double vise jaws design, vise jaws clamp the material on both side of the saw blade.
6. Manual floating roller for feeding.
7. Hydraulic blade tension control.
1.Precise cut off length setting.
2.Auto head elevation and quick approach control.
3.Unique split machine vice allows cutting to within as little as 50 mm of end automatically.
4.Cutting piece counter with auto-shut-off.
5.Multiple stroke counter for long pieces. (standard 9 times)
6.Power-driven blade cleaning brush and coolant cleaning flush hose.
7.Carbide and roller blade guides.
8.Hydraulic shuttle vice back-jaw feed method.
9. Hydraulic blade tension control.
10.Work-area light.
11.Automatic chip conveyor.
12.Two-way open rear vice jaws to ensure precise bar-feed repeatability even in cutting a little bit warped / surface rough works.
1.Precise cut off length setting.
2.Auto head elevation and quick approach control.
3.Cutting piece counter with auto-shut-off.
4.Multiple stroke counter for long pieces. (standard 9 times)
5.Power-driven blade cleaning brush and coolant cleaning flush hose.
6.Carbide and roller blade guides.
7.Hydraulic shuttle vice back-jaw feed method.
8. Hydraulic blade tension control.
9.Work-area light.
10.Automatic chip conveyor.
11.Two-way open rear vice jaws to ensure precise bar-feed repeatability even in cutting a little bit warped / surface rough works.
12.Unique split machine vice allows cutting to within as little as 50 mm of end automatically.
NC TYPE
1.SERVO FEED SYSTEM
The saw frame up and down is controlled by a servo motor with ball screw and rigid linear guides to ensure high speed and high accuracy cutting performance.
2.SERVO FEEDRATE CONTROL
The cutting feed rate is controlled by a close feedback servo system for auto adjusting optimizing cutting. With this feature, faster cutting performance and much longer blade service life are easliy achieved.
3.AUTO-POSITIONING GUIDE ARM
The blade guide arm will be moved automatically to the right position according to the size of material.
4.RIGID ,WIDE SPEED RANGE GEAR BOX REDUCER
This newly developed gear box provides wide speed range (20-120M/min) for cutting most many different materials with much less noise.
5.EASY OPERATING TOUCH SCREEN CONTROL SYSTEM
By using a 5.7 inches touch screen control makes operation easier(human technology interface).
1. Power-driven blade cleaning brush and coolant cleaning flush hose.
2. Idle wheel motion detector for blade jam/break shut-off.
3. Carbide guides suitable for bimetal and carbide tipped bands.
4. Hydraulic quick acting vise jaw for clamping.
5. Double vise jaws design, vise jaws clamp the material on both side of the saw blade.
6. Manual floating roller for feeding.
7. Hydraulic blade tension control.
1.Precise cut off length setting.
2.Auto head elevation and quick approach control.
3.Cutting piece counter with auto-shut-off.
4.Multiple stroke counter for long pieces. (standard 9 times)
5.Power-driven blade cleaning brush and coolant cleaning flush hose.
6.Carbide and roller blade guides.
7.Hydraulic shuttle vice back-jaw feed method.
8. Hydraulic blade tension control.
9.Work-area light.
10.Automatic chip conveyor.
11.Two-way open rear vice jaws to ensure precise bar-feed repeatability even in cutting a little bit warped / surface rough works.
12.Unique split machine vice allows cutting to within as little as 50 mm of end automatically.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.