496,145 active members
7,476 visitors online
Register for free
Login Register

NC Service

News

2018-12-27 Nicolas Correa Service installs the CORREA PRISMA 25 milling machine in Slovakia

Nicolas Correa Service installs the CORREA PRISMA 25 milling machine in Slovakia
Nicolás Correa Service, S.A. fully inspected this bed type CORREA PRISMA 25 milling machine, before finally performing the commissioning work at its customer's facilities in Slovakia. Go to press info

2018-11-23 A CORREA DIANA 35 retrofitted milling machine installed in Sweden by Nicolás Correa Service

A CORREA DIANA 35 retrofitted milling machine installed in Sweden by Nicolás Correa Service
A CORREA DIANA 35 second-hand milling machine was recently installed and commissioned in Sweden by the Nicolás Correa Service, S.A. technicians, following retrofitting work at the company's facilities in Burgos. Go to press info

2018-09-28 Sale of a CORREA CF20/20 milling machine for resistant steels

Sale of a CORREA CF20/20 milling machine for resistant steels
Nicolás Correa Service, S.A. carried out the mechanical retrofit of the CORREA CF20/20 milling machine, following its sale to a leading European company in global solutions for abrasion resistant, high yield strength steels. Go to press info

2018-08-30 NICOLÁS CORREA SERVICE retrofits another milling machine built three decades ago

NICOLÁS CORREA SERVICE retrofits another milling machine built three decades ago
In its mission to lengthen the service life of the CORREA milling machines through retrofitting work, NC Service has fully retrofitted another milling machine built at the end of the eighties, using 21st century technologies. Go to press info

2018-08-03 Nicolás Correa Service, S.A. retrofits and sells two DECKEL MAHO 5 axis machining centres

Nicolás Correa Service, S.A. retrofits and sells two DECKEL MAHO 5 axis machining centres
Two DECKEL MAHO 5-axis vertical machining centres, model DMU 50eVolution, were sold last May to two Italian companies following a retrofit by NC Service. Go to press info

2018-07-17 Nicolás Correa Service retrofits a CORREA FP40/40, 5-axis bridge type milling machine

Nicolás Correa Service retrofits a CORREA FP40/40, 5-axis bridge type milling machine
The CORREA FP40/40 CNC bridge type milling machine, fitted with a HEIDENHAIN TNC-426 numerical control, has been installed and commissioned at a company in California, following a mechanical retrofit carried out by NC Service at its facilities in Burgos... Go to press info

2018-04-06 CORREA L30/43 milling machine: complete retrofit by NC Service

CORREA L30/43 milling machine: complete retrofit by NC Service
This CORREA L30/43 CNC travelling column milling machine has been completely retrofitted by Nicolás Correa Service, S.A., to be finally sold to, and installed at a customer in Aragón, dedicated to component machining... Go to press info

2018-03-01 Nicolás Correa Service retrofits a French customer´s CORREA EURO2000 milling machine

Nicolás Correa Service retrofits a French customer´s CORREA EURO2000 milling machine
Nicolás Correa Service, S.A., offers customers the possibility to update the technology of their used milling-machines once, over time, the technological features of the machines have been rendered obsolete... Go to press info

2018-01-23 Nicolás Correa Service ends the year with fully operational new facilities

Nicolás Correa Service ends the year with fully operational new facilities
Following the refurbishment of NC Service´s new building, this is now fully operational for the year ahead. These new premises perform two key functions... Go to press info

2017-10-09 Sale of a CORREA CF20/20 milling machine to a company in Castilla & Leon

Sale of a CORREA CF20/20 milling machine to a company in Castilla & Leon
Following retrofit work performed by Nicolás Correa Service, S.A. on this second-hand CORREA CF20/20, this milling machine was finally sold and installed in early summer in a company in the region, with the NC Service guarantee of quality. Go to press info

2017-08-24 Another CORREA milling machine completely retrofitted by NC Service and installed in the United King

Another CORREA milling machine completely retrofitted by NC Service and installed in the United King
Nicolás Correa Service, S.A. installed and commissioned a completely retrofitted CORREA PRISMA 20 milling machine during the month of July 2017 at the facilities of a British company dedicated to the design and manufacture of components. Go to press info

2017-07-28 NC Service makes a first-time entry into South Africa, with a refurbished CORREA CF22/25 milling mac

NC Service makes a first-time entry into South Africa, with a refurbished CORREA CF22/25 milling mac
Nicolás Correa Service, S.A. has retrofitted two second-hand CORREA CF22/25 milling machines over the last few months and these were subsequently installed and commissioned at its customers´ plants, one in South Africa and the other in France. Go to press info

2017-06-16 The second CORREA EURO2000 milling machine retrofitted by NC Service and sold to the same customer

The second CORREA EURO2000 milling machine retrofitted by NC Service and sold to the same customer
After acquiring another CORREA EURO2000 milling machine on the second hand market, Nicolás Correa Service, S.A. performed the mechanical retrofit work and then subsequently sold it on to a Spanish company dedicated to the manufacture of ceramic moulds and which had previously purchased a similar machine, also retrofitted by NC Service. Go to press info

2017-06-07 NC Service installs and commissions the CORREA PANTERA gantry milling machine

NC Service installs and commissions the CORREA PANTERA gantry milling machine
Nicolás Correa Service, S.A. has installed and commissioned the CORREA PANTERA gantry milling machine, with the complete inspection and fine-tuning of the machine at the end customer´s facilities. Go to press info

2017-05-04 Retrofit and sale of CORREA A25 and A30 fixed bed milling machines for companies in France

Retrofit and sale of CORREA A25 and A30 fixed bed milling machines for companies in France
The CORREA A-25 and CORREA A-30 milling machine models are extremely popular in the second-hand industrial machinery market. Over the last few months Nicolás Correa Service, S.A. has retrofitted, sold and installed three milling machines of this type in various companies in France. Go to press info

2017-03-09 The CORREA CF-17 fixed bed milling machines retrofitted by NC Service are enjoying a huge success

The CORREA CF-17 fixed bed milling machines retrofitted by NC Service are enjoying a huge success
The CORREA CF-17 fixed bed milling machines retrofitted by NC Service are enjoying a huge success in the Spanish metalworking industry Go to press info

2017-02-02 NC Service retrofits a CORREA A10 milling machine with a Heidenhain TNC-320 numerical control

NC Service retrofits a CORREA A10 milling machine with a Heidenhain TNC-320 numerical control
Nicolás Correa Service, S.A. has fully retrofitted a CORREA A10 bed type milling machine, by installing a new Heidenhain TNC-320 numerical control and new electrical control panel. A result is a milling machine which, despite being more than two decades old, has now been fully upgraded to 2017 standards, before being placed on the market. Go to press info

2017-01-04 NC Service celebrates Christmas with improvements and upgrades on its website

NC Service celebrates Christmas with improvements and upgrades on its website
In our desire to innovate and progress, at Nicolás Correa Service, S.A. we´ve decided to celebrate Christmas and close 2016 with an improved and upgraded website, offering new features and sections for a more pleasant and intuitive browsing experience. Go to press info

2016-12-02 NC Service takes part in the first of three workshops on INDUSTRY 4.0, as a member of CBECyL

NC Service takes part in the first of three workshops on INDUSTRY 4.0, as a member of CBECyL
At Nicolás Correa Service, S.A. we´re aware of the need to take on new challenges that will help us to progress and innovate in our processes and services, in order to improve the quality of our products and the satisfaction of our customers. Go to press info

2016-11-21 NC Service retrofits the CORREA A30/30 bed-type milling machine and installs it in France

NC Service retrofits the CORREA A30/30 bed-type milling machine and installs it in France
Nicolás Correa Service, S.A. has mechanically retrofitted a CORREA A30/30 bed type milling machine, whilst also making a number of modifications, expressly requested by the end customer in order to ensure complete integration in its machining process. Go to press info

2016-10-10 NC Service installs and commissions a CORREA PRISMA 20 milling machine

NC Service installs and commissions a CORREA PRISMA 20 milling machine
Nicolas Correa Service, S.A. has installed and commissioned the fixed bed CORREA PRIMA 20 milling machine, once the machine had been fully inspected and retrofitted at the company´s facilities in Burgos... Go to press info