The OTT-JAKOB axial clamp ACS was developed for use in rotary machining. The actuation is designed axially, so that ACS can also be ideally used for grinding applications. The OTT-JAKOB ACS axial clamp was developed for use in rotary machining. Translated with DeepL
The CTC manual clamping unit was designed for rotating applications and is the only quick-clamping system available on the market which is actuated via the coolant hole. The tool can easily be mounted using a torque wrench from the front of the polygonal profile. Thanks to clamping through spring, little actuating torque is required. The CTC manual clamping unit was designed for rotating applications and is the only quick-clamping system available on the market which is actuated via the coolant hole.
For the shortest possible spindle lengths, shorter variants of many Type B clamping units are also available. For the shortest possible spindle lengths, shorter variants of many Type B clamping units are also available.
Type C HSK generates extremely short tool-changing times. The built-in holding function minimises waiting time during the tool-changing process. Our high-quality, optimised DLC coating also gives it a long life span. Type C HSK generates extremely short tool-changing times.
Type K HSK is the most cost-efficient solution in the range of OTT-JAKOB HSK-Clamping-Units. A solid basic variant, it is particularly suited for standard applications. Its high-quality coating gives it a long life span. Type K HSK is the most cost-efficient solution in the range of OTT-JAKOB HSK-Clamping-Units. A solid basic variant, it is particularly suited for standard applications.
The high-performance KM4X interface was developed to meet the specific requirements of working with hard-to-machine materials such as titanium alloys. KM4X allows a machine tool to utilise its full power potential in challenging turning and milling projects. Tools are clamped by four spheres which are forced radially outwards during the clamping process. Three contact surfaces deliver maximum stability and optimally distribute the clamping force, resulting in outstanding resistance to bending moments. The clamping units for the KM4X interface are the product of an exclusive development partnership between OTT-JAKOB and Kennametal. Our range of modular clamping systems can be used to configure a complete system. KM and KM4X adapters are available for the pull-in force measurement system The high-performance KM4X interface was developed to meet the specific requirements of working with hard-to-machine materials such as titanium alloys.
The polygon shank cone is a powerful interface that has proven its effectiveness especially in multitask machines. Launched on the market in 1990 under the name Coromant CAPTO, it was internationally standardised under ISO 26623 after the patent expired. The main feature of the polygon shank cone is its unique tapered polygonal shape which, due to its self-centring properties, effectively prevents axial and radial play. The face contact accurately defines the position of the tool in the holder and produces excellent repeat accuracy. The polygonal shank cone is therefore ideal for high-precision applications. The PSC interface features excellent stiffness due to the large taper diameter. Additionally, the balanced distribution of torque over the polygon surface generates maximum stability. The polygon shank cone is a powerful interface that has proven its effectiveness especially in multitask machines.
The QCF mounting group comprises the QCS clamping unit and a universal flange that is compatible with all conventional HSK standards. QCF is designed for use in rotating applications. The QCF mounting group comprises the QCS clamping unit and a universal flange that is compatible with all conventional HSK standards.
The QCG mounting group consists of the QCS clamping unit and a flange for common HSK sizes. The challenging HSK inside contour is already present. The QCG mounting group consists of the QCS clamping unit and a flange for common HSK sizes.
HSK has already become a standard interface in rotating processes. To make it possible to use it in static operations in turning machines, OTT-JAKOB – inspired after joining the HSK-T working group – developed the QCS manual clamping unit. The quick-change clamping system (QCS), designed especially for manual quick changes with HSK holders, is compatible with all HSK standards (A, B, E, F, T). It is not necessary to change the turret. The generation of force through Archimedean spirals produces a self-locking effect. Easy to operate with a spanner, it guarantees quick and easy tool changes. QCS can be used with and without coolant. It is particularly effective if combined with an HSK-T tool and an HSK-T holder. This is due to the high positioning accuracy resulting from the limited tolerance of the HSK-T driver grooves. The quick-change clamping system (QCS), designed especially for manual quick changes with HSK holders, is compatible with all HSK standards (A, B, E, F, T).
The steep taper is the original tool interface and continues to see frequent use in the machine tool industry. Steep taper technology has proven itself for decades and, in spite of the increasingly widespread use of HSK interfaces, remains a practical solution for standard machine tools. Universal spindle contour Thanks to the spindle inside contour developed by OTT-JAKOB, various standards of tool can be used in the same spindle. The universal spindle contour is compatible with all conventional tool standards. - DIN 2080 (OTT-Rille) - DIN 69871/69872 (ISO 7388/1/2 Type A) - ANSI B5.50-1978 (ISO 7388/1/2 Type B) - MAS 403-1982 BT/PT1 (30°) - MAS 403-1982 BT/PT2 (45°) The steep taper is the original tool interface and continues to see frequent use in the machine tool industry.
The SVC range is used in static machining. With its short projecting length, SVC has more space for the workpiece and a larger flight radius. The built-in seal effectively protects the clamping area from becoming flooded with coolant. Little actuating torque is required to reach high clamping forces. A conventional hexagon socket wrench is required to change tools. The SVC range is used in static machining.
The new HSK 15, 16 and 20 interfaces require a particularly small device for measuring the pull-in force. That is why we have developed the compact Power-Check Micro especially for these small interfaces. The measured values are sent wirelessly to a computer via the USB radio stick supplied.
The RS485 bus antenna* from OTT-JAKOB was designed to regularly monitor clamping force. It receives measurements from the wireless Power-Check transmitters. When connected to the machine control system, it can automatically process the data it receives. It can read out values in both digital and analogue format. * not available in every country The RS485 bus antenna from OTT-JAKOB was designed to regularly monitor clamping force. It receives measurements from the wireless Power-Check transmitters.
The Power Monitor* is a receiver for data sent by Power-Check 2 or the Power-Check Magazine from OTT-JAKOB. Using the software supplied with the Power Monitor, measurements from multiple transmitters can be displayed and saved in real time. The Power Monitor runs on batteries, allowing it to be used anywhere. Thanks to its user-friendliness, data can be retrieved easily and with no complicated processes. * not available in every country The Power Monitor is a receiver for data sent by Power-Check 2 or the Power-Check Magazine from OTT-JAKOB.
In machine tool technology, monitoring pull-in force as part of quality assurance is essential in order to guarantee consistently precise machining results. OTT-JAKOB Power-Check 2 is a testing device which measures the pull force of clamping systems. Four basic versions of the device are available, ensuring optimal measurement precision for every interface. Receiver units*: - Power-Monitor - USB-Radio-Stick - Bus-Antenne RS485 * not available in every country OTT-JAKOB Power-Check 2 is a testing device which measures the pull force of clamping systems.
The Power-Check Magazine* is a cost-effective solution from OTT-JAKOB which is designed to check pull force. The measurements are sent to a receiver over a wireless connection. This characteristic makes the device ideal for taking measurements in inaccessible machines and for automation in the sense of Industry 4.0. Unlike Power-Check 2, the Power-Check Magazine adapter is not exchangeable. The device is delivered as a single unit. The excellent two-year battery life and its capacity for up to 30,000 measurements are the reason for its excellent longevity. The protective case with IP68 rating ensures that the Power-Check Magazine functions reliably even in the most challenging conditions. Receiver units*: - Power-Monitor - USB-Radio-Stick - Bus-Antenne RS485 * not available in every country The Power-Check Magazine is a cost-effective solution from OTT-JAKOB which is designed to check pull force.
The USB radio stick is a receiver for the data transferred from our wireless transmitters Power-Check 2 and the Power-Check Magazine. It is able to receive data from numerous transmitters. Incoming measurements are displayed graphically in real time, saved and exported. * not available in every country The USB radio stick* is a receiver for the data transferred from our wireless transmitters Power-Check 2 and the Power-Check Magazine.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.