584,857 active members*
4,568 visitors online*
Register for free
Login Register
Horn Products
Hartmetall-Werkzeugfabrik Paul Horn GmbH
Indexable inserts for milling

Hochvorschub-Wendeschneidplatte DAH37 mit neuer Geometrie

The carbide grades developed for the high feed-rate cutting by HORN because of its high toughness and wear resistance is characterized by very high durability. Tooth profile roughing a large module-tooth segment achieved a cutter of the system DAH37 with a diameter of 40 mm, equipped with 5 cutting edges of type DAH37 in the material 42CrMo4 a chip volume Q 720 cm ³/min The inserts of the type DAH37 are now available in two geometries, a neutral and a new positive. All carbon neutral geometry of the varieties SA4B and SC6A, as well as the positive geometry of the variety SA4B edit to high-alloy steels, Martensitic and austenitic stainless steels, non-ferrous and cast iron qualities with a cutting depth of up to 1.2 mm and feeds depending on the material up to 3 mm / tooth. Here, the new positive geometry is especially suitable for unalloyed steels, aluminium and stainless steel. The three dashing indexable inserts have a corner radius of 0.8 mm and are fixed with a bolt in a precision shot. A RADIUS on the inside of the indexable insert ensures the quick immersion. DAH37 indexable cutter heads and thread milling cutters fit with 20/25/32 and 40 mm cutting diameter. The two types of milling cutters are fitted depending on the diameter, with 2 to 5 inserts. The cutter heads bear 5 to 8 indexable inserts type DAHM37 as slip-on cutters with a cutting diameter of 40/50/63 and 80 mm.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request