Toodle-Schnelllaufspindeln für das System DS

Precise milling diameter from 0.1 to 3 mm Horn presents the high-speed idler spindles by SFI Toodle recorded in the program. With this plugin, the user benefits not only the advantages of the world's proven spindles, but particularly by the combination with the Horn solid carbide cutters of the DS series. More than 600 DS cutters with a cutting diameter from 0.1 to 3 mm are available with pre-mounted Toodle-spindle within a week. While the router not only in terms of the diameter to the needs allow. Thanks to the many variants with different geometries, coatings and silicon carbide substrates, the tool for each application can be adapted. Advantages of high-speed idler spindles are the low cost, easy to install and the consistently high concentricity. The DS cutters feature a concentricity 0.005 mm and a long service life. Quick idler spindles are different drives with speeds available for machining tasks such as copying, high feed and Trochoidalfräsen, chamfer, and engraving. The models TB131 and TB131-90, turbine powered by cooling lubricant at 10 to 60 bar, reach speeds of 40,000 to 75,000 1/min. The turbine of model TG131 is powered with 3 to 7 bar compressed air and designed for speeds of 35,000 to 60,000 1/min. Milling cutters, bearings and gear can be fit to the requirements for special tasks. The spindles can be used even when the machine spindle. The quick idler spindles can be is easily relax in standard tool holders such as hydraulic -, collet chucks and Weldon and drill rod holders. Are ratcheted H5 or h6 tool Shanks with 3, 4 and 6 mm in diameter. With these and other product characteristics are quick idler spindles and milling tools are available, which make a significant contribution to the complete machining on turning and milling centres also at low speed of the machine spindle. https://www.phorn.de/Produkte/