584,802 active members*
4,926 visitors online*
Register for free
Login Register
Horn Products
Hartmetall-Werkzeugfabrik Paul Horn GmbH
Tool systems, modular

Kassetten Typ 842

Development of the modular cutting systems HORN extends its technical system the cassette system 842 with smaller dimensions for machining small workpieces. The system is suitable for the cutting off of different steel grades and scores with very high rigidity and efficient cooling. The cassettes 842 are components of the modular system of stinging 940 consisting of basic holder, stinging retaining piece and tape. For the user benefits of the flexibility in the combination of the components. The stinging retaining pieces are connected to the basic holder depending on the type of machine and application in different lengths. Thanks to the compact design, you can easily insert the cutting tool in various types of machines. HORN has developed with special connectors for lathes by Traub and index initially the novelty. The variant 842 S100 cutting program is suitable for economic cutting-off machine steels, high-strength and stainless steels. The cassette for use in lathes with smaller work rooms is secured on both sides. Depending on the editing task the cutting of the S100 type in different widths, geometries and coatings is available. The screws clamping of the cutting edge allows a simple tool change with high repeatability. The cutting tool works with internal coolant supply via support cooling down and clamping finger cooling from above. The coolant Jet acts directly on the cutting edge and ensures optimum work results. Compared to conventional cooling systems from the outside, this type of cooling ensures higher cutting parameters and longer tool life. The system allows the user to an economic usage. The cartridges of the type 842 were developed with the aim of: maximum stiffness. Consequently the advantages compared to swords in flatness and surface quality will be. Facing the parting surface may be waived the additional operation. The surface of the workpiece has a very flat parting surface with very low roughness after processing with the system of 842. HORN offers the cutting tool with depth of Tmax = 22 mm and 34 mm = Tmax on. The system especially when machining of bar stock in production comes into its own.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Modulares Gewindewirbel-System
Modulares Gewindewirbel-System
Tool system, modular
Hartmetall-Werkzeugfabrik Paul Horn GmbH
Tool systems, modular
Modulares Gewindewirbel-System
Horn thread whirl technology single - and multi-Start external threads and profiles are manufactured with six or nine dashing tools of the type M271 efficiently and economically. Very short processing times, thread whirling lathe machines offers significant advantages over the thread turning. The newly developed modular tool system offers plenty of combinations, the customer via ground carrier and ring boxes suitable for the various lathe machines existing in the market and drive units. It can Turbo fluid process with nine indexable inserts per ring cassette (of which three spurs and six with the very precise system S271 conventionally with six or nine indexable inserts per ring tape or with the newly developed Horn Work finished Schneider). About the Werkzeugkonfigurator on the site of the Horn the matching engine drive units and tool combinations can be found easy. The system about the new HCT cutting data calculator available, which is also available through the Horn website provides the correct cutting data.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request