555,194 active members*
2,317 visitors online*
Register for free
Login Register
ProdEq Trading

Contact

ProdEq Trading GmbH
Reckholder 1
9527 Niederhelfenschwil
Switzerland
+41(0)71 948 7060
+41(0)71 948 70 69

Route planner

Route planner

FEINTOOL HFA 8000

Asking price


  • Reference number 1045-40328
    Manufacture Year 1980
    Operation Hours not applicable
  • Metal working machine
  • Hydraulic Presses
  • Fine Blanking Presses
  • FEINTOOL
  • PRESS DESIGN
    - drive system: hydraulic
    - feedstock transport direction: left to right
    SLIDE
    - total force (nominal)
    800 to
    - stroke
    200 mm
    SLIDE (HYDR. PRESS)
    - approximation velocity max.
    120 mm/s
    - working velocity min.
    3 mm/s
    - working velocity max.
    24 mm/s
    - return velocity max.
    135 mm/s
    COUNTER RAM
    - nominal force
    200 to
    - stroke
    40 mm
    V-RING
    - nominal force
    400 to
    - stroke
    40 mm
    TOOL DIMENSIONS
    - lower table (left-right)
    1000 mm
    - lower table (front-back)
    1200 mm
    - upper table (left-right)
    1000 mm
    - upper table (front-back)
    1000 mm
    - shut height max.
    450 mm
    - ram adjustment
    100 mm
    OVERALL SPECIFICATIONS (COIL LINES)
    - sheet width max
    400 mm
    - sheet thickness max
    5 mm
    - max. weight of coil
    5 to
    - feedstock transport direction: left to right
    COIL CHAIR
    - max. weight of coil
    5 to
    DECOILER
    - design: single reel
    - sheet width max
    400 mm
    - sheet width (min)
    80 mm
    - max. weight of coil
    5 to
    - mandrel expansion range from
    460 mm
    - mandrel expansion range up to
    530 mm
    LEVELLER UNIT
    - sheet width max
    400 mm
    - sheet thickness max
    7.3 mm
    - sheet thickness (min)
    0.11 mm
    - material cross section max. (450 N/mm2)
    1700 mm²
    - number of leveller rolls
    9
    - diameter of leveller rolls
    50 mm
    - diameter of intermediate rolls
    150 mm
    - feed velocity min.
    5 m/min
    - feed velocity max.
    40 m/min
    - loop controls: yes
    STRIP-FEEDER
    - feeder type: roll feeder
    - sheet width max
    450 mm
    - sheet thickness max
    14 mm
    - speed (max)
    48 m/min
    CROP SHEAR
    - cutting force
    580 kN
    ELECTRICAL SPECIFICATIONS
    - total power consumption
    135 kW
    - mains voltage
    380 V
    - mains frequency
    50 Hz
    ATTACHMENTS -FINEBLANKING PRESS-
    - decoiler: yes
    - leveller unit: yes
  • + KOHLER straightener 50.400/9-5000.1 BU-EH, year 2005

    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More products from ProdEq Trading GmbH