531,737 active members*
3,776 visitors online*
Register for free
Login Register
SIMTEK  - Banner
SIMTEK News

simturn AX - Machining of bores in full material and boring of existing bores!

simturn AX multifunctional tools for the machining and boring of bores with one insert.

These simturn AX - tools from sizes A04 to A08 enable the machining of bores up to Ø 8,0 mm with bore depths up to 25,0 mm as well as the boring of bores with projection lengths up to 30,5 mm. Thanks to the inserts helical shape and the coolant supply through the insert, the chips are effectively and safely evacuated out of the bore.

These tools can therefore significantly increase productivity and save costs by eliminating the need for tool changes.

Especially in combination with a simturn AX - toolholder with ME clamping you will achieve considerable qualitative as well as economical advantages!

Information about simturn AX, the ME-clamping principle and the tools for the machining and boring of bores can be found here: https://www.simtek.com/simturnAX

Responsible for the content of this press release: SIMTEK Präzisionswerkzeuge GmbH

Contact

SIMTEK Präzisionswerkzeuge GmbH
Christophstraße 18
72116 Mössingen
Germany
+49 7473 9517-100
+49 7473 9517-77

Route planner

Route planner