Cutting heads / milling heads

Active and easy-to-use clamping system for 3,6 times higher cutting depths* and high process reliability. simmill H2 provides very high process reliability and tight axial and radial runout tolerances thanks to precision ground two-edged indexable cutting inserts in combination with an active and easy-to-use clamping system. The stable clamping system provides up to 3,6 times higher cutting depths* as of cutting edge width 1,3mm. *Compared to simmill MX - Precision ground cutting edges as of cutting edge width 1,3 mm - Maximum cutting depth of 18,0 mm - Cutting diameter of 100,0 mm und 4''

For the internal machining in bores as of Ø 39 mm simmill K2 offers, thanks to two cutting edges, considerably more cutting edges by contrast with comparable three-cutting-edged systems. Suitable milling cutter shanks, milling cutters or disc milling cutters are available with up to 20 insert seats. Up to three time more cutting edges on equal cutting diameter compared to simmill MX.

System of milling cutter shank, milling cutter or disc milling cutter and indexable milling insert with three cutting edges. Between 2 and 15 milling inserts per toolholder. Groove milling with high precision and stability in bores as of Ø 39,0 mm. All the toolholders are designed for use with SIMTEK-M14 inserts. The M14 indexable insert offers 3 edges per insert, high precision and repeat accuracy. Example applications: - Groove milling internal - Groove milling external - Groove and slot milling