simmill QX - solid carbide disc milling cutter for high milling depths!

High-performance tool system with 12 cutting edges for groove and slot milling with milling depths up to 16.5 mm! The system consists of carbide and steel toolhoders with internal coolant supply and milling inserts with 12 cutting edges with cutting widths from 0.5 mm and up to 6.0 mm. Thanks to high-performance toothing technology from Kaestner-Tools, torsion at the insert-holder interface is effectively counteracted and the insert sits very stably in the insert seat. This results in high torques and feeds are possible, a higher cutting performance is achieved and ultimately main times are reduced. Milling inserts: The milling inserts are available in cutting widths between 0.5 mm and 6.0 mm and are subdivided as follows: Cutting widths 0.5 mm /1.0 mm: well-proven cutting edge geometry for a wide range of applications, without corner radii Cutting widths 1.5 mm / 2.0 mm / 2.5 mm / 3.0 mm: GY geometry with staggered teeth with bilateral corner radii for smooth cuts and high surface qualities Cutting widths 4.0 mm / 5.0 mm / 6.0 mm: GY geometry with staggered teeth, a single-sided corner radius and an additional 45° chamfer for a division of the cut and thus less cutting pressure Tool holders: Carbide: With internal coolant supply, with shank diameter 16.0 mm and with usable lengths of 60.0 mm / 90.0 mm / 120.0 mm. Shank according to DIN 6535 HA. Steel: With internal coolant supply, with shank diameter 20.0 mm and a usable length of 32.0 mm. Shank according to DIN 1835 A.

Active and easy-to-use clamping system for 3,6 times higher cutting depths* and high process reliability. simmill H2 provides very high process reliability and tight axial and radial runout tolerances thanks to precision ground two-edged indexable cutting inserts in combination with an active and easy-to-use clamping system. The stable clamping system provides up to 3,6 times higher cutting depths* as of cutting edge width 1,3mm. *Compared to simmill MX - Precision ground cutting edges as of cutting edge width 1,3 mm - Maximum cutting depth of 18,0 mm - Cutting diameter of 100,0 mm und 4''

For the internal machining in bores as of Ø 39 mm simmill K2 offers, thanks to two cutting edges, considerably more cutting edges by contrast with comparable three-cutting-edged systems. Suitable milling cutter shanks, milling cutters or disc milling cutters are available with up to 20 insert seats. Up to three time more cutting edges on equal cutting diameter compared to simmill MX.

System of milling cutter shank, milling cutter or disc milling cutter and indexable milling insert with three cutting edges. Between 2 and 15 milling inserts per toolholder. Groove milling with high precision and stability in bores as of Ø 39,0 mm. All the toolholders are designed for use with SIMTEK-M14 inserts. The M14 indexable insert offers 3 edges per insert, high precision and repeat accuracy. Example applications: - Groove milling internal - Groove milling external - Groove and slot milling