Hello,
We have a new VF-6.
I would like to use the scale function in my programming.
After reading the manual and reviewing some examples , I
added the scaling coding to an example simple program. The machine alarmed out at the scaling coding
alarm ( 310 invalid g code).
Eventually gave up and took an example program listed in the manual
O0010 ;
T1 M06 ;
G54 G90 G00 X0 Y0 ;
G43 Z0.1 H1 ;
S500 M03 ;
G51 X1.5 Y1.5 P2.;
M97 P10 ;
G28 G91 Y0 Z0 ;
M30 ;
N10 G00 X1. Y1. ;
G01 Z-0.5 F15. ;
X2. F20. ;
Y2. ;
G03 X1. R0.5 ;
G01 Y1. ;
G00 Z0.1 ;
M99 ;
Still get the same alarm at the scale code.
Is there a parameter that needs to be set activating scaling?
Any advise is welcome.
thanks
caddisfly