Tschorn Mess- und Spannmittel
Products
48
Tschorn GmbH
Chucks, others
5D workpiece stopper
003420150
Application: One of the various application of the workpiece stopper is as a versatile instrument for the positioning on processing machines or during assembly. Delivery includes: Workpiece stopper with slide block M8x12 and fitting hexagon key. Please note: - Combination element available to extend or to combine two stoppers - Side block 10 - 18 mm available
FlexiClamp Aufspannbolzen
|
Chuck, others
Tschorn GmbH
Chucks, others
Build your own clamping system!
You only buy what you need!
Full flexibility thanks to the modular principle
New, incredibly fast and individual application: FlexiClamp
Assemble your FlexiClamp clamping system with the parts you need for your machining!
The FlexiClamp bolts are a modern combination of an aluminum body and hardened steel surfaces. The bolts are available in heights of 50 and 80 mm. The bolts are positioned and fastened using a centric screw with a hexagonal wrench while the bolt is stationary - without any undesired twisting.
You can reach any position on the machine table with the help of the transvers T-slot bar.
Quick setting with the clamping bolts: move each single bolt without clamping screw into the slide block of the machine table and position the bolt by hand as a stopper at the workpiece. Tighten the clamping bolt and it automatically helps you to position the workpiece.
Flexible for diverse workpiece shapes: no matter if round, oval, quadratical or even pentagonal - with the help of the clamping bolts, you can clamp all forms.
Safely fixed: the clamping screws are added from above. They clamp the workpiece powerfully and securely. A soft exchangeable brass ring avoids damages or scratches at the workpiece.
Drill-through: there is not much disturbing space under the workpiece - no clamping jaws, no base, nothing is disturbing when you drill-through your workpiece with diverse divisions of pitch circles.
The small disturbing contour enables multi-purpose machining even at places which you normally hardly reach.
FlexiClamp is also suitable for series production, since the workpiece can be changed in just a few simple steps using the bearing clamping screw.
Decide which screw you need: Standard screw for small to medium-sized series: minimized interfering contours thanks to the very flat screw head.
Or: Bearing clamping screw also for large series: Faster workpiece changes due to the innovative contour of the bearing screw head.
Decide which clamping height you need: Stable extension of the clamping height by 20 or 40 mm through a rigid extension with the same clamping screw length.
You only buy what you need!
Full flexibility thanks to the modular principle
New, incredibly fast and individual application: FlexiClamp
Assemble your FlexiClamp clamping system with the parts you need for your machining!
The FlexiClamp bolts are a modern combination of an aluminum body and hardened steel surfaces. The bolts are available in heights of 50 and 80 mm. The bolts are positioned and fastened using a centric screw with a hexagonal wrench while the bolt is stationary - without any undesired twisting.
You can reach any position on the machine table with the help of the transvers T-slot bar.
Quick setting with the clamping bolts: move each single bolt without clamping screw into the slide block of the machine table and position the bolt by hand as a stopper at the workpiece. Tighten the clamping bolt and it automatically helps you to position the workpiece.
Flexible for diverse workpiece shapes: no matter if round, oval, quadratical or even pentagonal - with the help of the clamping bolts, you can clamp all forms.
Safely fixed: the clamping screws are added from above. They clamp the workpiece powerfully and securely. A soft exchangeable brass ring avoids damages or scratches at the workpiece.
Drill-through: there is not much disturbing space under the workpiece - no clamping jaws, no base, nothing is disturbing when you drill-through your workpiece with diverse divisions of pitch circles.
The small disturbing contour enables multi-purpose machining even at places which you normally hardly reach.
FlexiClamp is also suitable for series production, since the workpiece can be changed in just a few simple steps using the bearing clamping screw.
Decide which screw you need: Standard screw for small to medium-sized series: minimized interfering contours thanks to the very flat screw head.
Or: Bearing clamping screw also for large series: Faster workpiece changes due to the innovative contour of the bearing screw head.
Decide which clamping height you need: Stable extension of the clamping height by 20 or 40 mm through a rigid extension with the same clamping screw length.
