Saw blade holders

Minimize set-up times with EasyZero zero point system
Easy, independent, precise! - exactly what you need!

Useful in every detail!
EASY centre point: Exactly in the middle of the system, there is a hole for quick and precise recording of the centre point.

EASY laid open: More safety from chips and dirt thanks to the open area.

EASY massively clamped: Broad and massiv clamping surfaces make the system stable and reduce vibrations.

EASY powerful: With only 60Nm torque, we reach up to 50 kN clamping force. (Usable in 4 directions)

EASY indexed: Precisely indexed via the indexing slots width 8 mm.

EasyZero - safety lock: Process reliability thanks to safety lock: conventional spring-loaded zero point systems have limited spring force. That is why they are often error-prone and are a safety risk. On the other hand, the EasyZero zero point system impresses with its insuperable safety lock.
This safety lock has especially been developed for the EasyZero zero point system. It secures clamping devices and workpieces mechanically and insuperably on the machine table. An opening of the safety lock due to overload is impossible - the clamping screw or clamping stud would have to be smashed for this.
Spring force, however, is limited and fails at high machining forces and in an emergency. Dirt can also reduce the spring force and allow risky opening. This usually provokes a crash which can lead to damage to the workpiece, tool or machine and can even cause injury to the machine operator.

Therefore safety first with EasyZero safety lock: A low crash risk minimizes the risk of injury, prevents damage to the workpiece, tool and machine and ensures precise work results.

It slips easily:
minimized canting, user-friendly as
well as highly precise.
+ Simple inserting
+ Repeatability < 0,005 mm

3 different studs available:
Positioning stud: responsible for highly precise positioning.
Orienting stud: responsible for exact orienting to the axis.
Clamping stud: with undersize simply useful for safe clamping.

Build your own clamping system!
You only buy what you need!
Full flexibility thanks to the modular principle

New, incredibly fast and individual application: FlexiClamp
Assemble your FlexiClamp clamping system with the parts you need for your machining!

The FlexiClamp bolts are a modern combination of an aluminum body and hardened steel surfaces. The bolts are available in heights of 50 and 80 mm. The bolts are positioned and fastened using a centric screw with a hexagonal wrench while the bolt is stationary - without any undesired twisting.
You can reach any position on the machine table with the help of the transvers T-slot bar.

Quick setting with the clamping bolts: move each single bolt without clamping screw into the slide block of the machine table and position the bolt by hand as a stopper at the workpiece. Tighten the clamping bolt and it automatically helps you to position the workpiece.
Flexible for diverse workpiece shapes: no matter if round, oval, quadratical or even pentagonal - with the help of the clamping bolts, you can clamp all forms.
Safely fixed: the clamping screws are added from above. They clamp the workpiece powerfully and securely. A soft exchangeable brass ring avoids damages or scratches at the workpiece.
Drill-through: there is not much disturbing space under the workpiece - no clamping jaws, no base, nothing is disturbing when you drill-through your workpiece with diverse divisions of pitch circles.
The small disturbing contour enables multi-purpose machining even at places which you normally hardly reach.

FlexiClamp is also suitable for series production, since the workpiece can be changed in just a few simple steps using the bearing clamping screw.

Decide which screw you need: Standard screw for small to medium-sized series: minimized interfering contours thanks to the very flat screw head.
Or: Bearing clamping screw also for large series: Faster workpiece changes due to the innovative contour of the bearing screw head.
Decide which clamping height you need: Stable extension of the clamping height by 20 or 40 mm through a rigid extension with the same clamping screw length.

Revolutionär! The new 3D Digital probe combines the best of both worlds, as the reading of the display is possible both digitally and analog. The digital display with numbers allows you to read easily and digitally. However, since it is difficult for your eyes to follow a rapidly changing digital display, the additional analog display of the 3D Taster Digital gives you security when reading. This is because a moving pointer can be followed visually much better and more reliably. In addition, a built-in LED shows you the status of the probing process with the help of different colors and thus helps you to prevent a Überfahren and resulting defect. With the 3D Probe Digital you can quickly and easily determine workpiece zero points and length dimensions in all axis directions (X/Y/Z) and align your workpiece or vise parallel to the machine axis.

Advantages of the 3D Probe Digital:
- safe reading thanks to digital and analog display on a display
- repeatability +/- 0.01 mm
- IP67 waterproof
- usable with our well-known ceramic keystones
- with serial number and Prüfzertifikat
- automatic shutdown to save battery

Selbstverständlich is the 3D button Digital small and slim design, is waterproof (IP67) and comes with serial number and Prüfzertifikat. Also included are a CR2450 battery and a ceramic button insert Ø3. Both items are available as spare parts.
Switch on the 3D Push Button Digital by moving the button insert in any direction X, Y or Z. When not in use, the 3D Push Button Digital switches off. When not in use, the button turns off after 2 minutes. Translated with DeepL