SPRINT 20|8 (Reference-Nr. 080141)

•  
  Reference number 080141

  Manufacture Year 2021

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Lathes

• Type of Machine

  Turret lathes (Capstan) and turret automatics

• Manufacturer

  DMG MORI

• Control

  Fanuc

• Description

  
  

  General
  2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i
  Working area
  Bar diameter max.	20 mm

• Specification

  
  

  Counter spindle collet cleaning	Counter spindle collet cleaning with coolant
  Changing kit from steady to sliding headstock	Changing kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronism
  Additional charge for belt type chip conveyor	Additional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machinin
  Oil mist filter for emulsion or oil	Oil mist filter for emulsion or oil, with mechanical, electrical and software preparation.
  Conveyor belt for finished workpieces	Conveyor belt for finished workpieces outside the machine
  Spindle liner for main spindle	Spindle liner tube for main spindle
  2 x Round clamping collet max D. 20 mm	2 x Round clamping collet type 76-64 F25 145E diameter max 20 mm
  Round guide bushing max. diam.20 mm	Round guide bush type Duenner B260 groove sealed with silicone max. diameter 20 mm

• State

  Used