BERG & SCHMID K-tech DG 5033 HA-I

•  
  Reference number 1108-66239

  Operation Hours not applicable

• Vendor

  WMT GmbH & Co.KG
  Siemensstraße 1
  46342 Velen-Ramsdorf

  Germany

  

• Main Category

  Metal working machines

• Category

  Sawing, Filing and Cutting-off Machines

• Type of Machine

  Band Sawing Machines (Horizontal)

• Manufacturer

  BERG & SCHMID

• Technical data

  capacity 90 degrees: round

  350 mm

  capacity 90 degrees: square

  330 mm

  500 x 310

  band speed

  15 - 100 m/min

  table height

  844 mm

  dimensions of saw-band

  4250 x 34 x 1,1 mm

  total power requirement

  2,2 kW

  weight of the machine ca.

  1,2 t

  dimensions of the machine ca.

  1,4 x 2,4 x 1,935 m

• Description

  ACTION PRICE!!!
  2-column double miter band saw K-tech DG 50/33 HA-I
  • 2-column miter saw
  • Solid, yet easy to use
  • Material height sensor (automatic cut start detection)
  • Smooth running thanks to bevel cut, feed controller + cutting pressure
  controller
  • Massive material infeed roller
  • Removable chip tray (disinfection)
  • Energy-saving and low-vibration thanks to bevel cut
  • Ergonomic, safe and free-standing control panel
  • Frequency-controlled saw drive 15 -100 m/min.
  • Hydraulic cutting pressure control valve
  • Hydraulic control of saw frame and vice
  • LEDs for monitoring all safety functions
  • Large dimensioned wheels (520 mm) a.
  • Clear miter setting up to 60°
  
  Semi-automatic function:
  1. Clamp material
  2. Saw starts
  3. Rapid lowering to the start of the material or the same for series cutting
  cut
  4. Saw band off
  5. Raise the frame to just above the material
  6. Open the vise
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used