BERG & SCHMID DGS 500600 HA-I

•  
  Reference number 1108-66230

  Manufacture Year not applicable

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Sawing, Filing and Cutting-off Machines
• Type of Machine
  Band Sawing Machines (Horizontal)
• Manufacturer
  BERG & SCHMID
• Technical data

  capacity 90 degrees: round

  500 mm

  capacity 90 degrees: square

  420 mm

  600x400

  saw band length

  5320x34x1,1 mm

  band speed

  15 - 100 m/min

  table height

  805 mm

  total power requirement

  3,0 kW

  weight of the machine ca.

  1,45 t

  dimensions of the machine ca.

  1,72 x 2,5 x 2,5 m

• Description
  Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I
  • miter left + right 60°
  • Frequency-controlled saw drive
  • 34 mm saw band height
  • Wear-free material support turntable, ball-bearing
  • To position the saw blade guides using a very wide linear guide
  • Strong, robust gearbox
  • Large chipboards
  • 2 integrated support rollers left and right
  • Removable chip tray (disinfection)
  • Free-standing control panel, safe and ergonomic
  • Storage space for tapes, consumables
  • Hydraulic cutting pressure control valve
  • Material height sensor (automatic cut start detection)
  • Preload super fast (front loading)
  • Hydraulic control of saw frame and vice
  • LEDs for monitoring all safety functions
  • Minimum cutting range from around 10 mm
  
  Semi-automatic function:
  1. Clamp material
  2. Saw starts
  3. Rapid lowering to the start of the material or the same for series cutting
  cut
  4. Saw band off
  5. Raise the frame to just above the material
  6. Open the vise
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.
• State
  Used

I like it 0