Tool Table

This problem happens when in Edit Tool Table.

2021.08.12 Software

I set the axis coordinates in Toolchange Position under the Tool Change tab,and click Update followed by OK.
When I return to check what I have entered, I find the Toolchange Position coordinates have reverted to zero, but the values have been relocated as a Tool Offset under the Offset tab.

If this is correct behaviour, then can someone please explain how it works.

Thanks. Martin.

Yes, it seems that this is a bug. We will fix this ASAP

Quote:

---

Originally Posted by PlanetCNC

Yes, it seems that this is a bug. We will fix this ASAP

---

Thanks for that.

Something else I have noticed is that if you make changes under the Speed & Feed tab, then eventually, the edit fields 'grey out' and become uneditable. Only a restart of TNG seems to bring it back to life for a while.

Martin.

Can you post a screenshot?=

Here you go.

Under the Parameters tab, I changed the tool material from Carbide to HSS and it became 'greyed out' after that.

Martin.

Attachment 468694

Quote:

---

Originally Posted by blowlamp

I changed the tool material from Carbide to HSS and it became 'greyed out' after that.

---

Do you have valid license and connected controller?
This feature requires valid license.

That sounds like the answer.

I have a controller with a valid license, but I'm running in simulation mode on a different computer at home.
I'll try again on the CNC connected computer.


Martin.