1 Attachment(s)
Re: Fanuc OT Cycle Counter
If anyone can help me, I'd be very grateful. I'm running a bar puller and using a stopwatch to know when to stop the machine. It's going to bite me if I'm not careful!!
My work counter functions with a M30. and counts up fine. When I replace the M30 with a M99 to loop the program it doesn't count. Understandable. I have another machine that uses a M12. That machine is a 18i and has a separate parts counter.
My understanding is there is a parameter that will be set with a number to designate the M code. ie Parameter #?? is set to 12 so M12 is my counter M code. Please correct me if I'm talking rubbish.
Control is Fanuc OT on a Yang ML25
Attachment 504044