Printable View
Hello
I've built my own PIC based Stepper driver and I want to test it from the target computers parallel port card which is a PCI card, I have yet to find any PP Control/monitor software out there that will work with a PCI PP card.
Does anyone know of one that exists. I really don't want to have to program one if one exists.
Ron
Check out mach3
http://www.machsupport.com/downloads.php
Sorry I guess I should have explained more.
I will be using Mach3 when it is done but for the time being I want to turn on and off bits in the PP's data byte manually, all software that I've seen do this wants an address that is a standard PP address (0x378), I'm using a PCI card that gives me an address of 0xC000, this is not normally usable with the software I've seen.
Thanks
Ron
That's different. Your correct, a lot of software that does parallel port IO in Windows uses inpout32.dll which I don't believe supports more than the old 16 bit IO space.