CMX 1100 V (Reference-Nr. 051063)

•  
  Reference number 051063

  Manufacture Year 2017

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining Centers (Vertical)

• Manufacturer

  DMG MORI

• Control

  Fanuc

• Description

  
  

  General
  Vertical Machining Centres; Control: Control F0iMF
  Characteristics
  Maximum load (table centre)	1000 Kg
  Weight approx.	5500 Kg
  Dimensions (L x W x H)	3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) m
  Drive power (25% DC)	15 kW
  Rapid feed X / Y / Z	36/36/30 m/min
  Table surface	1400 x 560 mm
  Drive power (100% DC)	11 kW
  Spindle taper	BT 40
  Tool Magazine with	60 Positions
  Speed max.	12000 rpm
  Movement X / Y / Z	1100/560/510 mm

• Specification

  
  

  Standard spindle 12,000 min-1, 15/ 11 kW	Standard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)
  Spindle Taper 7/24 Taper #40/ Grip MAS	Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.
  Retention Knob: Special (Center-Through) (7/24 Taper #40)	Retention Knob: Special (Center-through) (7/24 Taper #40) The spindle collet applicable to the special (center-through) retention knob is installed. *Tool retention knob is not included. *The through-spindle coolant specification requires a dedicated r
  Interface for Workpiece seating detection (1 line)	Interface for Workpiece Holding Detection (1 Circuit) For the workpiece holding detection interface, pneumatic 1 circuit 1 port are provided on the in-machine ceiling (right side). The panel is installed on the upper right of the machine front and the p
  Interface for Hydraulic fixture (hydraulic 2 circuits )	Interface for Hydraulic Fixture (Hydraulic 2 Circuits) For the fixture interface, hydraulic 2 circuit 4 ports are provided on the in- machine ceiling (right side). The hydraulic unit (made by NACHI) put on the oil pan with casters is placed at the rear
  Tool storage capacity 60 tools	Tool Storage Capacity 60 Tools Chain-type magazine Tool capacity: 60 tools Technical random address type Max. tool diameter - With adjacent tools: f80 mm (dia.3.15 inch.) - Without adjacent tools: f125 mm (dia. 4.92 inch.) Max. tool length: 300 mm (11.

• State

  Used