WALTER
Products
Engineering Kompetenz
765
WALTER Aktiengesellschaft
Thread milling cutters
solid carbide milling cutter / thread / for hardened steel / cutting edge
Walter Prototyp TMO HRC orbital thread mills
The TMO HRC from Walter Prototyp is a solid carbide orbital thread mill for hard machining applications. The tool possesses a stable body construction with large core diameter for vibration-free deployments. Its short cutting edge allows the cutting forces to be significantly reduced. The design is suitable for threads with a dimension of 2 x d.
Facts and advantages:
- maximum process reliability when producing small threads above M2 in high-strength or hardened materials up to 65 HRC
- an extremely heat-resistant TiAlN layer, in conjunction with a special negative cutting edge geometry, ensures a very long tool edge life
- our "TEC+CCS" and "GPS" expert system provides a special milling strategy, tailored specifically to the respective application, as well as optimum cutting data and the 'ready-to-use' CNC programme
The TMO HRC from Walter Prototyp is a solid carbide orbital thread mill for hard machining applications. The tool possesses a stable body construction with large core diameter for vibration-free deployments. Its short cutting edge allows the cutting forces to be significantly reduced. The design is suitable for threads with a dimension of 2 x d.
Facts and advantages:
- maximum process reliability when producing small threads above M2 in high-strength or hardened materials up to 65 HRC
- an extremely heat-resistant TiAlN layer, in conjunction with a special negative cutting edge geometry, ensures a very long tool edge life
- our "TEC+CCS" and "GPS" expert system provides a special milling strategy, tailored specifically to the respective application, as well as optimum cutting data and the 'ready-to-use' CNC programme
solid carbide milling cutter / finishing / thread / high-precision
|
TC610, TC611
WALTER Aktiengesellschaft
Thread milling cutters
TC610 and TC611 thread mills
Walter Prototyp – Setting new standards for thread mills
with the Supreme line.
Features and advantages:
- Significant increases in tool life and process reliability thanks to the new WB10RD and WJ30RC grades
- New geometry prevents vibration and produces excellent surface finishes
- Optimum chip removal as internal cooling prevents fracture
Walter Prototyp – Setting new standards for thread mills
with the Supreme line.
Features and advantages:
- Significant increases in tool life and process reliability thanks to the new WB10RD and WJ30RC grades
- New geometry prevents vibration and produces excellent surface finishes
- Optimum chip removal as internal cooling prevents fracture
solid carbide milling cutter / thread / coated / cutting edge
|
TMC
WALTER Aktiengesellschaft
Thread milling cutters
Walter Prototyp TMC thread mills
The Walter Prototyp TMC is a solid carbide thread mill with excellent wear resistance and cutting edge strength that is also very heavy-duty. Its concentricity is less than 10 μm. This allows both excellent thread quality and a long tool life.
Facts and advantages:
- thread milling and countersinking with a single tool
- graded TiCN multi-layer hard material coating for extremely high cutting speeds and a long tool life
- optimised geometry for a soft cutting action
- optimised flute run-out improves stability
- with axial internal cooling for even greater process reliability in M4 size and above
- optimised geometry for a soft cutting action
The Walter Prototyp TMC is a solid carbide thread mill with excellent wear resistance and cutting edge strength that is also very heavy-duty. Its concentricity is less than 10 μm. This allows both excellent thread quality and a long tool life.
Facts and advantages:
- thread milling and countersinking with a single tool
- graded TiCN multi-layer hard material coating for extremely high cutting speeds and a long tool life
- optimised geometry for a soft cutting action
- optimised flute run-out improves stability
- with axial internal cooling for even greater process reliability in M4 size and above
- optimised geometry for a soft cutting action
solid carbide milling cutter / thread / cutting edge / with internal coolant
|
TMO
WALTER Aktiengesellschaft
Thread milling cutters
Walter Prototyp TMO orbital thread mills
In developing the Walter Prototyp TMO solid carbide orbital thread mills for small threads from M1.6 to M8, Walter Prototyp has not only expanded its product range, but also introduced a new milling strategy. Since the cutting edge is only three thread turns in length, thread milling is performed in a special helical curve. This new operating principle leads to a significant reduction in radial forces, which in turn increases process reliability, particularly when working with materials that are difficult to cut or very expensive components.
The brand new TMO thread mill with internal cooling supports the chip removal, especially in deep holes threads. This effects that it has a very good thread quality, highest process reliability and therefore a significant increasing tool life.
Facts and advantages:
- greater shank diameter for vibration-free deployments, even with a longer overhang length
- shorter cutting edge, smaller helix angle and positive rake angle for reduced forces and a soft cut
- design for 2 x d and 3 x d deep threads with and without internal cooling
- our "TEC+CCS" and "GPS" expert system provides a special milling strategy, tailored specifically to the respective application, as well as optimum cutting data and the 'ready-to-use' CNC programme
In developing the Walter Prototyp TMO solid carbide orbital thread mills for small threads from M1.6 to M8, Walter Prototyp has not only expanded its product range, but also introduced a new milling strategy. Since the cutting edge is only three thread turns in length, thread milling is performed in a special helical curve. This new operating principle leads to a significant reduction in radial forces, which in turn increases process reliability, particularly when working with materials that are difficult to cut or very expensive components.
The brand new TMO thread mill with internal cooling supports the chip removal, especially in deep holes threads. This effects that it has a very good thread quality, highest process reliability and therefore a significant increasing tool life.
Facts and advantages:
- greater shank diameter for vibration-free deployments, even with a longer overhang length
- shorter cutting edge, smaller helix angle and positive rake angle for reduced forces and a soft cut
- design for 2 x d and 3 x d deep threads with and without internal cooling
- our "TEC+CCS" and "GPS" expert system provides a special milling strategy, tailored specifically to the respective application, as well as optimum cutting data and the 'ready-to-use' CNC programme
solid carbide milling cutter / thread / drilling / for cast iron
|
TMD
WALTER Aktiengesellschaft
Thread milling cutters
Walter Prototyp TMD thread milling cutter
The Walter Prototyp TMD is a solid carbide thread milling cutter for cutting internal threads. This tool drills, countersinks and mills the thread in one operation. It is suitable for use in short-chipping aluminium and cast iron materials. Its hard material coatings have been specifically matched to its wide range of applications, which leads to an extremely long tool life.
Facts and advantages:
- maximum cost efficiency with drilling, countersinking and thread milling in a single working cycle, thereby eliminating the need for unproductive tool changes and travel paths
- increased productivity by shortening processing times by up to 50 %
- space savings in the tool magazine
- reduction in both the number and variety of tools, since the tool is used for both blind hole and through hole threads
- precise positioning of the core hole in relation to the milled thread
- our "TEC+CCS" and "GPS" expert system provides optimum cutting data, as well as the 'ready-to-use' CNC programme
The Walter Prototyp TMD is a solid carbide thread milling cutter for cutting internal threads. This tool drills, countersinks and mills the thread in one operation. It is suitable for use in short-chipping aluminium and cast iron materials. Its hard material coatings have been specifically matched to its wide range of applications, which leads to an extremely long tool life.
Facts and advantages:
- maximum cost efficiency with drilling, countersinking and thread milling in a single working cycle, thereby eliminating the need for unproductive tool changes and travel paths
- increased productivity by shortening processing times by up to 50 %
- space savings in the tool magazine
- reduction in both the number and variety of tools, since the tool is used for both blind hole and through hole threads
- precise positioning of the core hole in relation to the milled thread
- our "TEC+CCS" and "GPS" expert system provides optimum cutting data, as well as the 'ready-to-use' CNC programme
