The power and strength is where it needs to be - times two. WhizCut has re-invented parting off inserts for the future. See them for the first time at EMO Hannover 2019.
WhizTwin is a bold new insert that helps reduce waste material and has a cutting edge stability. It will be shown for the first time at EMO Hannover 2019. The patent pending design of WhizTwin generates a cutting edge stronger than any other and stability not seen before. The strength and increased stability of the cutting edge is maximised with two cutting edges at the front. This lets the toolholder be clamped in a more stable position with a smaller overhang from the toolholder plate - reducing instability and vibrations which are the main challenges when parting off.
The WhizTwin concept optimises cutting geometry and relief around and under the cutting edge which boosts mass and stability. The stability of a WhizTwin 1 mm parting off insert achieves the same result as a 1,5 mm wide conventional parting off insert.
WhizTwin is forceful, stable and overall brilliant. The narrow insert allows you to lower your production cost as you save material using it. Removing less bar material is great for you and also for the environment. It’s a win win - with WhizTwin.
Quick facts and benefits of WhizTwin:
- More stability, less vibrations: with two cutting edges at the front. The holder can be clamped closer to the tool plate.
- Longer tool life: thanks to the stability of the insert and cutting edge.
- Control chips: with a choice of four chip control and cutting rakes to optimise performance for most applications.
- Save material: and barstock. As the WhizTwin insert is more stable than ordinary parting off inserts, it is possible to use a more narrow part off.
- Full range: of parting off/grooving tools with choices from 0,5-2 mm and extra long 0,5 mm insert - that parts off 13 mm.
Sweden 
