501,857 active members
5,773 visitors online
Register for free
Login Register

Fresmak Clamping Solutions

Products

INNOVATION is not an option is OUR ATTITUDE since 1967

Block-SC Pneumatic
Block-SC Pneumatic
Expanding mandrel
Fresmak S.A.
Clamping devices, pneumatic
Block-SC Pneumatic
Pneumatic static blocks reach a pressure between 8 KN and 20 KN with an infeed power of 6 bar

Stroke range of 6 and 8mm

- Double effect actioning

- Repeatability accuracy of 0.020 mm

- Long guides

- All basic components are hardened

- Basic surfaces are ground

- Entirely compact and fully protected against chips

- Total lubrication system. Greasing channels within the base jaw and base body

- The air supply for machining and lubrication can be performed from the sides or the base of the body

- Pneumatic supply up to 9 bar
Functioning

Pneumatically actioned wedge clamping system: the multiplication of the pneumatic force is performed by actioning the wedges. These wedges are ground in order to give rigidity and precision to the set.
Product details Homepage Product request
Block-SC Hydraulic
Block-SC Hydraulic
Expanding mandrel
Fresmak S.A.
Clamping devices, hydraulic
Block-SC Hydraulic
Hydraulic static blocks reach a pressure between 16 KN and 40 KN with an infeed power of 120 bar

Stroke range of 6 and 8mm

- Double effect actinoning

- Repeatability accuracy of 0.020 mm

- Long guides

- All basic components are hardened

- Basic surfaces are ground

- Entirely compact and fully protected against chips

- Total lubrication system. Greasing channels within the base jaw and base body

- The oil supply for machining and lubrication can be performed from the sides or the base of the body

- Hydraulic supply up to 120 bar
Functioning

Hydraulically actioned wedge clamping system: the multiplication of the hydraulic force is performed by actioning the wedges. These wedges are ground in order to give rigidity and precision to the set.
Product details Homepage Product request
Arnold 5X Mechanical
Arnold 5X Mechanical
Expanding mandrel
Fresmak S.A.
Machine vices
Arnold 5X Mechanical
High Pressure ARNOLD 5X, are fitted with a clamp as far away as possible form the body and therefore the machine bench.

- Accuracy of 0.01 mm in clamping repeatability.

- Designed in two sizes M and L with an adjustable force of up to 30 kN in the uppermost part.

- Essential for highly specialized machining process such as titanium and aluminum, which requires totally different clamping forces.

- They maintain their constant length irrespective of the size of the work piece, being specially designed for the use in 5-axis machining centres.

- Exterior elements needed for achieving high pressure, which usually make 5X machining work difficult, are not required with this model.

- Power regulator available in M size.

- Fitted with a high pressure mechanical intensifier.

- Side windows for quick cleaning and swarf removal.

- Customized jaws available according to the shape of the work-piece.
SIZE M

- Power regulator optional.
SIZE L

- With power regulator.

- Bigger clamping field than size M.
Product details Homepage Product request
Arnold 5X Mechanical with pressetting
Arnold 5X Mechanical with pressetting
Machine vice
Fresmak S.A.
Machine vices
High Pressure ARNOLD 5X, are fitted with a clamp as far away as possible form the body and therefore the machine bench.

- Accuracy of 0.01 mm in clamping repeatability.
- Designed in two sizes M and L with an adjustable force of up to 30 kN in the uppermost part.
- Essential for highly specialized machining process such as titanium and aluminum, which requires totally different clamping forces.
- They maintain their constant length irrespective of the size of the work piece, being specially designed for the use in 5-axis machining centres.
- Exterior elements needed for achieving high pressure, which usually make 5X machining work difficult, are not required with this model.
- Power regulator available in M size.
- Fitted with a high pressure mechanical intensifier.
- Side windows for quick cleaning and swarf removal.
- Customized jaws available according to the shape of the work-piece.

SIZE M

- Power regulator optional.

SIZE L

- With power regulator.
- Bigger clamping field than size M.
Product details Homepage Product request
ARNOLD CLASSIC Hydraulic
ARNOLD CLASSIC Hydraulic
Other clamping device
Fresmak S.A.
Machine vices
ARNOLD CLASSIC Hydraulic
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.

- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Two part straight vice option available.

VERSIONS

Standard
Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.

Straight
Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.

Two part straight
Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
Product details Homepage Product request
Arnold Classic Hydraulic with presetting
Arnold Classic Hydraulic with presetting
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.

- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Two part straight vice option available.

VERSIONS
Standard

Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight

Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.

Two part straight

Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
Product details Homepage Product request
Arnold Classic Mechanical
Arnold Classic Mechanical
Machine vice
Fresmak S.A.
Machine vices
Arnold Classic Mechanical
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.

- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Two part straight vice option available.

VERSIONS
Standard

Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.

Straight

Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.

Two part straight

Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
Product details Homepage Product request
Arnold Durmak Mechanical
Arnold Durmak Mechanical
Other clamping device
Fresmak S.A.
Machine vices
Arnold Durmak Mechanical
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.

- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws
within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Suitable for working with hardened inserts. The positioning of the inserts determines the clamping
capacity of the vice.
- Fixed jaw with several insert settings. Movable swinging jaw with several insert settings.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split option upon request.
Product details Homepage Product request
Arnold Durmak Mechanical with pressetting
Arnold Durmak Mechanical with pressetting
Machine vice
Fresmak S.A.
Machine vices
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.

- Accuracy of 0.01 mm in clamping repeatability.

- May be clamped to the table either by the four standard clamps supplied or by using four screws within the body.

- Suitable for working in horizontal and vertical machining centres.

- Flexible Design: All the jaws of the MB2 vices are interchangeable.

- Side windows for quick cleaning.

- Clamping force is 40/50 kN depending on the model.

- Power regulator optional.

- Angle driver for handle clearance optional.

- Split vice for clamping larger work-pieces optional.

- Suitable for working with hardened inserts. The positioning of the inserts determines the clamping capacity of the vice.

- Fixed jaw with several insert settings. Movable swinging jaw with several insert settings.

- Fitted with a high pressure mechanical intensifier.

- Power regulator optional.

- Angle driver for handle clearance optional.

- Split option upon request.
Product details Homepage Product request
Arnold Mat Hidraúlica con regulador
Arnold Mat Hidraúlica con regulador
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Fitted with a high pressure hydraulic intensifier which does not require any external supply.
- Power regulator optional.
- Angle driver for handle clearance upon request.
Product details Homepage Product request
Arnold Mat Hydraulic
Arnold Mat Hydraulic
Other clamping device
Fresmak S.A.
Machine vices
Arnold Mat Hydraulic
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centers (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- Ideal for working in horizontal and vertical machining centers.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.

- Clamping force is 25/40/50 kN, depending on the model.

- Fitted with a high pressure hydraulic intensifier which does not require any external supply.

- Power regulator optional.

- Angle driver for handle clearance upon request.
Product details Homepage Product request
Arnold Mat Mechanical
Arnold Mat Mechanical
Machine vice
Fresmak S.A.
Machine vices
Arnold Mat Mechanical
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Two clamping possibilities of the work piece, either towards the fixed head or in reverse direction.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.

TIPS FOR USE

- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
Product details Homepage Product request
Arnold Mat Mechanical with presetting
Arnold Mat Mechanical with presetting
Machine vice
Fresmak S.A.
Machine vices
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- Ideal for working in horizontal and vertical machining centres.
- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or on the head vertically.
- Side windows for quick cleaning of the inside of the vices.
- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.
- Clamping force is 25/40/50 kN, depending on the model.
- Two clamping possibilities of the work piece, either towards the fixed head or in reverse direction.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.

TIPS FOR USE

- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
Product details Homepage Product request
Arnold MB2 Mechanical
Arnold MB2 Mechanical
Other clamping device
Fresmak S.A.
Machine vices
Arnold MB2 Mechanical
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.

- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws
within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
- Split vice as standard item available.
Product details Homepage Product request
Arnold MB2 Mechanical with pressetting
Arnold MB2 Mechanical with pressetting
Machine vice
Fresmak S.A.
Machine vices
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.

- Accuracy of 0.01 mm in clamping repeatability.
- May be clamped to the table either by the four standard clamps supplied or by using four screws within the body.
- Suitable for working in horizontal and vertical machining centres.
- Flexible Design: All the jaws of the MB2 vices are interchangeable.
- Side windows for quick cleaning.
- Clamping force is 40/50 kN depending on the model.
- Power regulator optional.
- Angle driver for handle clearance optional.
- Split vice for clamping larger work-pieces optional.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Angle driver for handle clearance upon request.
- Split vice as standard item available.

Product details Homepage Product request
Arnold Mechanical with presetting
Arnold Mechanical with presetting
Machine vice
Fresmak S.A.
Machine vices
Arnold Mechanical with presetting
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.

- Accuracy of 0.01 mm in clamping repeatability.
- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.
- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.
- Large aperture up to 375 mm and 845 mm if the body is in two parts.
- Clamping force is 25/40/50/80 kN, depending on the model.
- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.
- Fitted with a high pressure mechanical intensifier.
- Power regulator optional.
- Two part straight vice option available.

VERSIONS
Standard

Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight

Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.

Two part straight

Ideal for large work-pieces.
It clamps the work-pieces on top of the guides or on top of the table.
An inner tie-rod joins both parts of the vice.
Product details Homepage Product request
Arnold SC 5X
Arnold SC 5X
Other clamping device
Fresmak S.A.
Machine vices
Arnold SC 5X
ARNOLD SC vices are compact, high and self-centring and maintain constant length.

- Accuracy of 0,01 mm in clamping repeatability.
- Accuracy 0,02 mm in centring.
- Designed to work on machining centres with small tables, as well as, within 5 controlled axes machining centres.
- Compact design with exterior guides that avoid deformation as the clamping force is distributed throughout the width.
- Steel components.
- Consealed vice: Totally closed to prevent chips from getting in.
- Threaded right-left spindle which can be operated with a standard key.
- Clamping force ranging from 10 to 35 kN, depending on the model.
- Interchangeable jaws can reach a height of 125 mm, which means they can overcome the biggest obstacle for this type of work by avoiding collisions with the machine spindle or the rotation of the table.
- All standard jaws are may be used by adding soft jaws first.
- Suitable for clamping round work pieces.
- Base plate available for raising the vice available.
- Equipped with a mechanical spindle without high pressure.
- Supplied with high jaws specially designed for 5X machines, which avoid collisions of the spindle and allow for short tools to be used.
- Grease points allow for the vice to always be in optimal conditions for use.
SPECIAL JAWS

Possibility of working with machined soft jaws according to the shape of the workpiece.
Product details Homepage Product request
Arnold SC Vice Self-Centring
Arnold SC Vice Self-Centring
Expanding mandrel
Fresmak S.A.
Machine vices
Arnold SC Vice Self-Centring
ARNOLD SC vices are compact, high and self-centring and maintain constant length.

- Accuracy of 0,01 mm in clamping repeatability.

- Accuracy 0,02 mm in centring.

- Designed to work on machining centres with small tables, as well as, within 5 controlled axes machining centres.

- Compact design with exterior guides that avoid deformation as the clamping force is distributed throughout the width.

- Steel components.

- Consealed vice: Totally closed to prevent chips from getting in.

- Threaded right-left spindle which can be operated with a standard key.

- Clamping force ranging from 10 to 35 kN, depending on the model.

- Interchangeable jaws can reach a height of 125 mm, which means they can overcome the biggest obstacle for this type of work by avoiding collisions with the machine spindle or the rotation of the table.

- All standard jaws are may be used by adding soft jaws first.

- Suitable for clamping round work pieces.

- Base plate available for raising the vice available.

- Equipped with a mechanical spindle without high pressure.

- Jaws may be rotated: Large clamping field with 2 jaw positionings.

- Grease points allow for the vice to always be in optimal conditions for use.
  • Arnold SC
Product details Homepage Product request
Arnold Twin hydraulic
Arnold Twin hydraulic
Other clamping device
Fresmak S.A.
Machine vices
Arnold Twin hydraulic
High pressure ARNOLD TWIN vices are capable of clamping two pieces simultaneously.

- Accuracy of 0.01 mm in clamping repeatability.

- Suitable for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- Clamping force is 25/50 kN, depending on the size.
SPECIAL JAWS

Possibility of working with machined soft jaws according to the shape of the workpiece.

- Fitted with a high pressure hydraulic intensifier which does not require any external supply.

- Angle driver for handle clearance upon request.

- 6 different clamping types, interchanging the position of standard jaws: either by rotating the side jaws and fitting the stepped jaw in the middle, or by fitting any of the central jaws on the side closets to the handle.

- To clamp a single workpiece, place it in Station II.
3RD HAND MECHANISM

Function which permits first one work-piece to be clamped and then the other, enabling it to be fitted in the vertical position.

Operation of the 3rd Hand: By turning the handle bring the moveable jaw I towards the work-piece situated in station I until it is clamped.

Maintaining the turn bring moveable jaw II towards the work-piece situated in station II until it is clamped.

Continuing with the turn, jumpstart the intensifier and start to clamp with high pressure.
Product details Homepage Product request
SC – Soft Jaws
SC – Soft Jaws
Vacuum fixing plate
Fresmak S.A.
Vacuum fixing plates
SC – Soft Jaws
Designed for tiding pieces of difficult geometries
Can be machined and hardened
Material: 1140F (C45)
Product details Homepage Product request
Arnold hydraulic spindle for CLASSIC
Arnold hydraulic spindle for CLASSIC
Speed-up head
Fresmak S.A.
Chucks, others
The basis of the intensifying hydraulic spindle is that it works with a closed oil cylinder. On inserting the piston into the chamber, the pressure due to the section differences or diameters intensifies with little effort. The movement is light; this is noted on turning the handle which is also smooth. As these are hollow spindles, the force is transmitted inside the threaded spindle. Therefore this carries out only the stroke movement, and enjoys long-lasting wear as it does not have to carry out any clamping force.
Product details Homepage Product request
Arnold Mat Automat
Arnold Mat Automat
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Mat Automat
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- Ideal for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.

- Clamping force is 25/40/50 kN, depending on the model.

- Designed to automate processes and robotize them.

- Two clamping possibilities, either towards the fixed head or the opposite direction. Normal clamping is towards the fixed head.

- Fitted with a high pressure double acting oleo-dynamic spindle, with spring push-back effect.

- 4 mm. automatic stroke for closing and opening.

- Adjustable clamping force and directly proportional to oil pressure input (see manual).
TIPS FOR USE

- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
ELEMENTS NEEDED

- Hydraulic unit or double effect 70 bar pneumo-hydraulic pump with vice unit connection hose, pressure control switch, safety valve integrated into the unit and ON-OFF switch.

- Gauge.
Product details Homepage Product request
Arnold Mat Oleo-dynamic
Arnold Mat Oleo-dynamic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Mat Oleo-dynamic
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- Ideal for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.

- Clamping force is 25/40/50 kN, depending on the model.

- Designed to automate processes and robotize them .

- Two clamping possibilities, either towards the fixed head or in reverse direction. Normal clamping is towards the fixed head.

- Fitted with a single acting oleo-dynamic spindle, with spring push-back effect.

- Rotary connection at the inlet and the outlet for oil.

- 4 mm. automatic stroke for closing and opening.

- Adjustable clamping force and directly proportional to oil pressure input (see manual).
TIPS FOR USE

- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
ELEMENTS REQUIRED

- Hydraulic unit or single acting 500 bar pneumo-hydraulic pump with vice unit connection hose, pressure control switch, safety valve integrated into the unit and ON-OFF switch.

- Pressure gauge.
Product details Homepage Product request
Arnold Mat Pneumo-Hydraulic
Arnold Mat Pneumo-Hydraulic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Mat Pneumo-Hydraulic
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- Ideal for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.

- Clamping force is 25/40/50 kN, depending on the model.

- Designed to automate processes and robotize them.

- Pneumo-hydraulic high pressure single acting intensifier, supplied by compressed air at 6 bars.

- Clamping force adjustable by the air pressure (see manual).

- Automatic stroke for closing and opening up to 3 mm.

- The vice operation may be manual (used with a valve unit sent with the vice) or by using a pedal situated near the machine or may be controlled by CNC by using a solenoid valve.
TIPS FOR USE

- The air must be filtered (dry air).

- Should control pedal be used, the set of valves supplied with the vice must be placed between the compressor and the pedal, not between the pedal and the vice.
ELEMENTS NEEDED

- Connection of the compressor to the vice.

- Filter unit, gauge and lubricator of the air inlet.
Product details Homepage Product request
Loading ...