Machine tools > Turning machines (lathes) > Universal automatic lathes

Used CNC lathes - as good as new!
Our used machines are modernized by our qualified employees and their decades of experience in mechanical engineering. Assemblies are usually completely disassembled, cleaned and repainted as required.
The inner life undergoes a "fresh cell cure". Wearing parts, guide elements, fluid-carrying lines, sensors and cables in the machine room are replaced, working and milling spindles are overhauled in proven manufacturer quality and the control technology is broug...

Machine tools > Machining centres > Other machining centres

Benefit from our INDEX and TRAUB action machines available at short notice.
Our action machines are usually pre-disposed or pre-produced INDEX or TRAUB lathes, as well as trade fair or demonstration machines - all with a very low number of operating hours.

The advantages are obvious:
> Attractive offer prices
> Promotional machines in certified manufacturer quality
> Available at short notice
> Worldwide service
> Predominantly iX4.0 ready
> Mechanical engineering "Made in Germany
Tra...

Software and Hardware > Software for product development > Software for product simulation

INDEX TRAUB-TECHNO: ->Software for PC for CNC programming of complementary machining technologies. +Technology packages I -> (options): Technology packages allow supplementary technological machining with output of CNC blocks for further processing. Runs and can be used on PC independently of INDEX Virtual Machine and TRAUB WinFIexPS: > Technology package 3D-STEP Import (SAP 12033646) > DeburringPRO technology package (SAP 12033647) > Milling technology package (SAP 12033645) >...

Software and Hardware > Software for product development > Software for product simulation

The PLUS for high productivity
Program. Simulate. Optimize.

In addition to powerful functions for programming, optimization and simulation, WinFlexIPSPlus offers "setup and automatic operation" in the 3D model, exactly as if you were standing in front of the machine. In addition to the previous advantages of WinFlexIPS, the user receives the real 3D model and the complete operating elements with the functions as on the real machine - all on the PC!

> Fast and safe programming due to optim...

Software and Hardware > Software for product development > Software for product simulation

VirtualPro - the novel programming support Program creation could not be simpler. VPro Guide The new standard in programming VirtualPro with VPro Guide offer a novel and particularly simple and powerful programming support for all INDEX lathes: VPro Guide stands for a new type of programming method from INDEX that consistently guides the operator through the machining process and consistently covers all machining technologies such as turning, drilling, milling and also the automation of machines...

Software and Hardware > Software for machines > Software for CNC controls

TX8i-s V8 controller - ideally equipped for Industry 4.0 Easy operation, maximum programming flexibility and absolute process reliability. The high-end product lines of the next generation. TRAUB TXi-s V8 offer the right automation solution for all machine concepts - for one-off, small-scale and large-scale production. It contributes to an increase in productivity in many different industries, such as mechanical engineering, the automotive industry or the electronics industry. With its CNC techn...

Software and Hardware > Software for machines > Software for CNC controls

The FANUC 31i control: powerful and proven. The FANUC 31i control is ideal for highly complex, multi-axis, multi-channel machines designed for fast, high-precision machining. The hardware and innovative software provide the highest performance, precision and surface quality. > Control of the latest FANUC series (31i-B) > FANUC control panel with CNC keyboard and 15" touch screen > Original FANUC machine control panel with axis and spindle override > Electronic handwheel integrated in...

Software and Hardware > Software for machines > Software for CNC controls

Open, flexible, powerful. The premium CNC control for machine tools. With the SINUMERIK 840D sl, Siemens Machine Tool Systems offers an open CNC for modular premium machine concepts. With powerful and innovative system functions, the SINUMERIK 840D sl opens up an inexhaustible technology spectrum. SINUMERIK 840D sl leads the way in opening up global machining trends - and is therefore the preferred CNC in the industries of the future. > In addition to scalable NCU performance, the SINUMERIK 8...

Controls & electronic equipment > Control and drive systems > Robot controllers

iXpanel - The cockpit for easy integration of the machine into your company organization. Focus on production and control - Industry 4.0 included -&> The iXpanel operating concept opens up access to networked production. With iXpanel, all relevant information for efficient production is available to the employee directly at the machine at all times. iXpanel is already included as standard and can be expanded individually. -You can use iXpanel in the way you need it, tailored to your company o...

Controls & electronic equipment > Control and drive systems > Robot controllers

> With the iXcenter robotic cell, unmachined and finished parts can be fed and removed quickly, safely and flexibly.
The overall sequence between the machine and the robot cell is created using predefined macros in the NC sequence program. The robot accesses the working area of the machine via the sliding door, which opens and closes automatically. The iXcenter has a modular design and allows you to integrate different processes economically. Thanks to the accessibility of spindles, tool carrie...

Controls & electronic equipment > Control and drive systems > Robot controllers

> With the optional iXcenter robotic cell, raw and/or finished parts can be fed and discharged quickly, safely and flexibly.
The robotic cell is ergonomically docked to the machine. It can simply be moved to the right during the setup process, thus allowing unhindered access to the work area. In production operation, the iXcenter is fixed in front of the machine work area. The robot accesses the work area via the sliding hood of the machine, which opens automatically behind the robot cell.

-...

Parts and components > Machine accessories > Bar feeders

Everything from a single source - bar feeder LMI and ABC Bar feeder for optimum turning results. Bar feeder for INDEX ABC Material bar stop in 1.5 s Cycle-parallel reloading > Material bar stop in 1.5 s > Material bar reload in 5 s > Cycle-parallel reloading > Fast adaptation of the guide half shells to the bar diameter > Hydrodynamic oil cushion in the guide channel > Very short design, only approx. 100 mm longer than the material bar > Material bar is always guided to the...

Parts and components > Machine accessories > Bar feeders

INDEX bar feeders MBL22-8/ 24-6/ 32-6/ 40-6/ 40-8 Increase in productivity for the multi-spindle machine. Hydrodynamic guidance concept Bar loading magazine and machine from a single source - The bars are drilled parallel to the main time of the machine, this enables a very fast bar change - Higher maximum speeds possible in numerous applications - R&R of the loading side and the drilling unit during production - Material feed during production - Material feed during production - Material feed d...

Parts and components > Machine accessories > Bar feeders

MBL76 electronic bar feeder for optimum turning results. Fast bar change and precise guidance. Bar loading magazine for single-spindle lathes Fastest set-up times & Ergonomic accessibility Quick-change guide bushes &; Shortest set-up times thanks to good and ergonomic accessibility and quick-change guide bushes & Favorable loading height, loading during machining possible;Mineral cast body for very high rigidity and damping > Purely electrical, so no hydraulic or pneumatic connect...

Precision tools & clamping technology > Tooling systems > Tool holders

Machine accessories such as clamping devices, boring rings or spindle reducers and much more can be found in the INDEX iXshop - the equipment portal for lathes.
Translated with DeepL

Precision tools & clamping technology > Tooling systems > Tool holders

"A smart investment in any case - tool holders directly from the machine manufacturer".
You have a machine from our company and are looking for the right tool holders?
Of course, we have the optimal holders for you and even more: as a cost-effective solution, we have put together ideal tool holder packages for you.

Our tool holder portfolio:
VDI tool holders (Capto holder, shrink collets, quick change system WFB, ...)
HSK toolholders (HSK-T/HSK-A interface, shrink fit collet, hydraulic...

Machine tools > Turning machines (lathes) > Universal automatic lathes

TNL32 sliding headstock automatic lathe - Compact. Precise. Fast. Three variants with measurable advantages for your production. Spindle capacity with 32 mm 8,000 min-1 Speed max. 305 mm Z-path Sliding headstock lathe max. > simultaneous machining with up to 3 tools (each tool with variable feed) > clearly structured work area with large axis travels and large tool flight circles > excellent traction äexcellent traction thanks to a large sliding hood > easy changeover between lo...

Machine tools > Turning machines (lathes) > Universal automatic lathes

The TRAUB TNL20 - an extremely powerful automatic sliding headstock lathe. Productive long turning and short turning for workpieces of medium and high complexity from the bar or with integrated robot cell. Spindle opening with 20 mm 10,000 min-1 Speed max. 205 mm Z-travel sliding headstock lathe max > Simultaneous machining with 2, 3 or 4 tools > High tool stock for setup-friendly production Easy changeover between long and short turning operation > Short tool change times due to CNC in...

Machine tools > Turning machines (lathes) > Universal automatic lathes

TNL12 - The sliding headstock automatic lathe. Compact long and short automatic lathe for the precise machining of small workpieces. Spindle opening with 13 mm 12.000 min-1 Speed max. 130 mm max. Z-travel > Bar passage up to ø 13 mm > Up to four tool carriers for simultaneous tool use > High tool stock for setup-friendly production > Simple changeover from sliding headstock to short turning operation > Very compact machine design for high productivity per unit area > Sho...

Machine tools > Turning machines (lathes) > Universal automatic lathes

Multi-spindle machine with innovative backworking - A development for the latest production technologies Spindle throughput with 52 mm 5,000 min-1 Speed max. 30 kW Power max. 130 Nm Torque max. > Highly dynamic slides with sliding guide (X-axis) > Wear-free Z-axis due to hydrostatically mounted quills > Chuck part machining with loading and unloading by robot or linear handling > Äußonly fast swivel synchronous spindles with C-axis > Swivel arm is locked in the machinin...

Machine tools > Turning machines (lathes) > Universal automatic lathes

INDEX CNC Multi-Spindle Machine MS40-8: More productive with 8 spindles! Designed exactly to the user's requirement. Spindle capacity with 40 mm 7,000 min-1 Speed max. 24 kW Power max. 57 Nm Torque max. - Highly dynamic slides with sliding guide (X-axis) - Wear-free Z-axis due to hydrostatically mounted quills - Freely accessible working area and therefore extremely setup-friendly - Chuck parts machining with loading and unloading by robot - Directed part removal by linear handling - Extremely f...