Jokisch

Environmentally friendly, hydrated anti spatter fluid for MIG and MAG welding. Active welding substance concentrate can be used for most common industrial welding process. Prevents the adherence of welding spatter to the workpiece surface. Dilute with water before use. Can be applied with hand sprayers or air spray cans. Spray the work surface slightly, apply only thin spray film. • For arc welding with electrodes, easy removal of the slag, even with V-seams • Easy cleaning of welding seams • Also prevents the welding spatter from burning in the burner heads during inert gas welding and contact welding. • When used correctly no complications with further processing of priming, painting, galvanizing etc • It is completely non flammable and can therefore be applied without risk in the workplace • Product is exempted from the specific labelling requirements of hazardous products according to ordinance on hazardous substances

An environmentally friendly silicone-free release agent for inert gas and electrofusion welding. Suitable for radiopaque welds. No CFC and CHC contamination and no release of propane/butane, as applied by hand sprayer or air spray can. - No burning of the welding spatters on the workpieces and thus no costly post-processing of the workpieces. - easy removal of the slag during arc welding with electrodes, even with V-seams. - Very easy cleaning of the welding seams. The residues can be easily removed with warm water or alkaline degreasing agents. - prevents the weld spatter from burning in the torch heads during inert gas welding processes and contact welding. - no difficulties during painting, electroplating, browning etc. - Product contains no water and should therefore be used for radiopaque welds. - no release of CFC/CKW or combustible propane/butane. - Product is not a hazardous substance or does not require labelling. - No spray can waste products. - easily and quickly biodegradable according to test method OECD 301 A-F.

Environmentally friendly, hydrated anti spatter fluid for MIG and MAG welding. Ready-to-use active welding substance, can be used for most common industrial welding process. Prevents the adherence of welding spatter to the workpiece surface. Can be applied with hand sprayers or air spray cans. Spray the work surface slightly, apply only thin spray film. • For arc welding with electrodes, easy removal of the slag, even with V-seams • Easy cleaning of welding seams • Also prevents the welding spatter from burning in the burner heads during inert gas welding and contact welding • When used correctly no complications with further processing of priming, painting,galvanizing etc. • It is completely non flammable and can therefore be applied without risk in the workplace • Product is exempted from the specific labelling requirements of hazardous productsaccording to ordinance on hazardous substances

Environmentally friendly, hydrated anti spatter fluid for MIG and MAG welding. Active welding substance is contained in an aluminum bag, thus three times more efficient than conventional spray cans. The propellant used is non-flammable compressed air. • For arc welding with electrodes, easy removal of the slag, even with V-seams • Easy cleaning of welding seams • Also prevents the welding spatter from burning in the burner heads during inert gas welding and contact welding • When used correctly no complications with further processing of priming, painting, galvanizing etc. • It is completely non-flammable and can therefore be applied without risk in the workplace • Product is exempted from the specific labelling requirements of hazardous products according to ordinance on hazardous substances • VOC free • Spray can contains no hazardous solvents • No release of CFC / CFC or flammable propane / butane Advantages of the 2-chamber spray can • Very high proportion of active ingredients, 3 more economical than conventional spray cans • Spray can can be used in any position, even in overhead operation • Emptying the spray can up to 99% • Cost saving

Environmentally friendly, silicone free, anti spatter paste for the burner heads and contact tips for MIG and MAG welding. Prevents the sticking of welding spatter to welding nozzles / tips and guarantees an extended service life. • Reliably prevents the burning of welding spatter in burner heads in all inert gas welding processes • In the case of contact welding, it prevents the contact tip from burning • Adhesive / clogging of the nozzles is impossible, a perfect mixing gas atmosphere is guaranteed • No pore formation in the weld metal • Extend the service life of burner heads, nozzles and contact tips • The product is not hazardous and does not require labelling • Environmentally friendly as it is mainly formulated on native oils and waxes • No generation of toxic fumes, since chlorine, amine, and sulfur-free

The coolant fluid has been developed for the sole non-ferrous metal processing. Prevents staining and tarnishing of workpiece and machinery.

With additional EP Additives for heavy machining. Also applicable in hard and soft water areas, stable and low foaming even at very high pump pressures. Easy machining / tapping of titanium, manganese.

For any heavy-duty machining operation on non-ferrous materials as well as for steel, casting and aluminum materials on individual machines, operating centres and central systems. • semi-transparent, finely disperse, reduced capture of copper ions • high pressure lubricant with good lubricating effect • high stability, low losses • good protection against corrosion • resistant to microorganisms, good service life • low foaming even in soft water

For any heavy-duty machining operation of steel, stainless steel, cast iron and aluminium materials on individual machines, operating centres and central systems. • semi-transparent, finely disperse • high pressure lubricant with good lubricating effect • high stability, low losses

Semi-synthetic, finely dispersed coolant for general machining and grinding. For internally cooled tools and high pump pressures. Very high stability against microorganisms. Due to its low foaming tendency also in areas with very low water hardness applicable. Suitable for the processing of all non-ferrous metals, iron and steel.

Soluble cutting and grinding fluid for use on any type of ferrous and non-ferrous metal. Suitable for all general machining and CNC machining. Particular useful when grinding and cutting application should be covered by one product. Special formulated for HPC (High Performance Cutting) applications, innercooling and high pressure.

Soluble cutting and grinding fluid for use on any type of ferrous and nonferrous metal. Suitable for all general machining and CNC machining. Particular useful when grinding and cutting application should be covered by one product. Special formulated for HPC (High Performance Cutting) applications, innercooling and high pressure.

Thermally stable and easily filterable hydraulic oil. Especially in highly stressed hydraulic systems with increased demands on wear protection and thermal and oxidative stability, the hydraulic oils reliably protect the sensitive control valve technology and other hydraulic components.

Soluble cutting fluid for use on any type of ferrous and non-ferrous metal. Suitable for all general machining and CNC machining (milling, drilling, turning, boring, cutting, sawing, etc.), punching and drawing. Because of its excellent chip removal properties feed and speeds can be increased.

Soluble cutting and grinding fluid for use on any type of ferrous and non-ferrous metal. Suitable for all general machining and CNC machining. Particular useful when grinding and cutting application should be covered by one product. Special formulated for HPC (High Performance Cutting) applications, innercooling and high pressure.

Improves the lubrication properties, long tool life, increased surface finish and excellent flushing properties. Is used to improve the lubricity in water-soluble coolants and is compatible with most emulsions.

Highly effective defoamer for water soluble Mineral oil-containing / free cooling lubricants. Premixed with water or existing emulsion. Add to highly turbulent place (but not before the filter). Before each new addition it is necessary to wait until a thorough mixing has occurred (should be added in portions). The defoamer should be added until a sufficient foam collapse occurred.

Soluble cutting fluid for use on any type of ferrous and non-ferrous metal. Suitable for all general machining and CNC machining. Particular designed for modern machines with interior cooled tools.

For severe machining of high alloyed steel. Water-soluble cooling lubricant, excellent suited for general processing. Extremely hard water-stable and a very low foaming tendency with different water qualities. Particularly selected AW additives allow machining at high cutting speeds.

Semi-synthetic, finely dispersed coolant for general machining. For inernally cooled tools and high pump pressures. Very high stability against microorganisms, also suitable for grinding. Free of formaldehyde.

Soluble cutting and grinding fluid for use on any type of ferrous and nonferrous metal. Suitable for all general machining and CNC machining. Particular useful when grinding and cutting application should be covered by one product. Special formulated for HPC (High Performance Cutting) applications, innercooling and high pressure.

Designed for medium machining and a wide variety of materials. Additionally laid-out for processing non-ferrous metal. Futher caractaristics: Stable in hard water, stable even under high pump pressure.

Film forming corrosion protection oil, with excellent water displacing properties. Preservation of semifinished and finished products between working operations. • Very good wetting properties • High spray water resistance • Easy to degrease • High aging stability • Long storage capability without resinification

Builds a thin, vaseline like, self healing protective film. Ensures an excellent water displacing and coating (wetting) effect, protects from fingerprints. Corrosion protection oil for metallic surfaces which need to be protected during storage. The product can be applied either by dipping, brushing or spraying. • Based on hydrocarbons, anti-corrosive and water-displacing additives • Self-healing protective film • Water displacing and coating (wetting) effect • Protects from fingerprints