NETZSCH-Gerätebau

The multi-functional design of the DEA 288 Epsilon (including furnace or laboratory press) allows for the application of a great variety of different test conditions such as heat, cold or UV light. This enables the user to easily and conveniently determine the best parameters for processing the material. Customized Test Conditions The multi-functional design of the DEA 288 Epsilon (including furnace or laboratory press) allows for the application of a great variety of different test conditions such as heat, cold or UV light. This enables the user to easily and conveniently determine the best parameters for processing the material. A complete dielectric analyzer consists of the DEA electronics and a sensor. Disposable sensors are connected via an adaptor box. Four models of DEA 288 Epsilon are available: the regular laboratory version and the slim version with small footprint and two industrial versions. Both instruments are equipped with the same state-of-the-art electronics and have the ability to control additional accessories such as the lab furnace or lab press. The technical differences between the devices are in the design of the housing, the footprint and the maximum number of channels. DEA 288 Industrial Version For in-proess cure monitoring, two industrial versions are available: the standard industrial version and the 19” rack version for an electrical cabinet. Both versions can support up to 8 DEA modules which can be extended for up to 16 channels each. DEA 288 Slim Version The portable DEA 288 slim version with up to 2 DEA channels offers optimum test conditions for thermosetting resins in the lab or in an industrial process by occupying only a small footprint. DEA 288 Laboratory Version The laboratory version is a perfect fit into the NETZSCH instrument line for thermal analysis and thermophysical properties detection which is also reflected by its physical design of our 200 series. The footprint of the laboratory version is identical to that of a DSC or a TGA system. Additionally, the multi-channel option allows up to 8 samples to be measured in one run, making this instrument ideal for process development.

The New All-Inclusive Product Package for DSC Measurements Easy-to-use, robust, precise, optimized for everyday use – these are the features of the innovative DSC 214 Polyma. The unique design of this instrument encompasses everything needed for successful DSC investigations – regardless of whether the user is a beginner or an experienced professional. Above all, it is the two new software developments that are setting new standards: AutoEvaluation and Identify. These have the potential to revolutionize DSC analysis. - New all-inclusive 360° product package for the characterization of polymers - Easier sample preparation than ever before - Automated measurement and evaluation

The new LFA 467 HyperFlash features a wide temperature range, very high efficiency (with its sample changer for 16 samples), extremely fast data acquisition rates and an intelligent lens system (ZoomOptics) between the sample and detector. •Broadest temperature range available, from -100°C to 500°C With a single instrument setup – that is, without having to swap out either the detector or the furnace – the LFA 467 HyperFlash® can carry out measurements from -100°C to 500°C. Coupled with the broadest range of accessories available on the market, the instrument opens the door to completely new dimensions in the determination of thermophysical properties. •Sample throughput up to 4 times higher due to sample holder for 16 samples One unique advantage of the LFA 467 HyperFlash® is its ability to simultaneously measure up to 16 samples over the entire temperature range. This allows for maximum sample throughput with a minimum input of operational time and effort. Refill systems are available for automatic refilling of the Dewar on both the detector and the furnace, allowing uninterrupted operation of the LFA system around the clock. •ZoomOptics for more precise measurement results without measurement errors The patented ZoomOptics system (patent no.: DE 10 2012 106 955 B4 2014.04.03) optimizes the field of view of the detector, thus eliminating any influences caused by aperture stops. The result is a significant increase in the precision of the measurement results. •Ultra-fast recording of measurement data for thin samples (2 MHz) Thin films and high-conductivity materials require a very high data acquisition rate for the precise recording of rapid temperature increases on a sample’s upper surface. The LFA 467 HyperFlash® offers a sampling rate of 2 MHz – an unprecedented value for LFA systems.