493,968 active members
6,259 visitors online
Register for free
Login Register
BIAX Products
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BE 1005
for countersinking
The straight drilling deburrers come in three different sizes for different holes. The push start makes handling easier and you can also regulate the speed.
Product details Homepage Product request
Countersinking deburring tool - BE 1005 R
Countersinking deburring tool - BE 1005 R
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
With a countersinking diameter of up to 29 mm and a speed of 550 rpm the BE 1005 R is our biggest and most powerful drill deburrer. The spindle is switched on and off via the supply air.
Product details Homepage Product request
Countersinking deburring tool - BE 309 R
Countersinking deburring tool - BE 309 R
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
This drill deburrer can be used to deburr holes up to a Ø of 5.5 mm. The version BE 309 R features a push start. The BIAX hose unit is included with this model.
Product details Homepage Product request
Countersinking deburring tool - BE 805 R-2
Countersinking deburring tool - BE 805 R-2
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
This drill deburrer can be used to deburr holes up to a Ø of 24 mm. This version is switched on and off using the supply air. The BIAX hose unit is included with this model.
Product details Homepage Product request
Countersinking deburring tool - BEW 309 R-1
Countersinking deburring tool - BEW 309 R-1
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Our top device when it comes to deburring holes in difficult to reach areas. The height of the drive head is only 20,5 respectively 21,5 mm (depending on the countersink version). The drive can be adjusted in the range of 0-900 rpm. The BIAX hose unit and an HSS countersink Ø 2-6 mm are included with this model.
Also available:
- Countersink range Ø 2-6 mm: Order no. HSS 001 950 293 (incl.) / Order no. HM 001 950 299
- Countersink range Ø 2.5-10 mm: Order no. HSS 001 950 297
Product details Homepage Product request
Countersinking deburring tool - BEW 605 R
Countersinking deburring tool - BEW 605 R
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
This machine has an angular design which allows the deburring of holes in difficult to reach areas up to a countersinking diameter of 24 mm. Typically these are holes with transverse bores. The BIAX hose unit is included with this model.
Also available:
- Countersink range Ø 3.5-14 mm: Order no. HSS 001 950 295
- Countersink range Ø 5-24 mm: Order no. HSS 001 950 296
Product details Homepage Product request
Manual deburring tool - B 805 H
Manual deburring tool - B 805 H
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - B 805 H
This device is a version of the BE 805, which has a lever valve instead of a push start. The control button on the side allows you to switch between clockwise and counterclockwise rotation. The machine is superbly suited to brushing holes. By changing the direction of rotation the life of the brush can be increased many times over.
Product details Homepage Product request
Manual deburring tool - BE 1005
Manual deburring tool - BE 1005
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BE 1005
for countersinking
The straight drilling deburrers come in three different sizes for different holes. The push start makes handling easier and you can also regulate the speed.
Product details Homepage Product request
Manual deburring tool - BE 309
Manual deburring tool - BE 309
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BE 309
The straight drilling deburrers come in three different sizes for different holes. The push start makes handling easier and you can also regulate the speed.
Product details Homepage Product request
Manual deburring tool - BE 309 R-2
Manual deburring tool - BE 309 R-2
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
This drill deburrer can be used to deburr holes up to a Ø of 5.5 mm. It is switched on and off using the supply air. The BIAX hose unit is included with this model.
Product details Homepage Product request
Manual deburring tool - BE 805
Manual deburring tool - BE 805
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BE 805
The straight drilling deburrers come in three different sizes for different holes. The push start makes handling easier and you can also regulate the speed.
Product details Homepage Product request
Manual deburring tool - BE 805 R
Manual deburring tool - BE 805 R
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BE 805 R
This drill deburrer can be used to deburr holes up to a Ø of 24 mm. This version features a push start. The BIAX hose unit is included with this model.
Product details Homepage Product request
Manual deburring tool - BEG 309
Manual deburring tool - BEG 309
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BEG 309
If it is not possible to set the countersink correctly, this lever version is recommended.
Product details Homepage Product request
Manual deburring tool - BEW 309 E
Manual deburring tool - BEW 309 E
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BEW 309 E
Our top device when it comes to deburring in difficult-to-reach
places, such as holes in cross holes. The height (excluding countersink) of the very low-wear drive head is just
15 mm and can, therefore, also reach very narrow places.
The extremely quiet and light drive can be set from 0 to 900 RPM
and has very low air consumption: 150 l/min.
Product details Homepage Product request
Manual deburring tool - BEW 605
Manual deburring tool - BEW 605
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BEW 605
This angle-design machine allows you to deburr holes in hard to reach areas, e.g. holes in cross holes, which have to be deburred from the inside.
Product details Homepage Product request
Manual deburring tool - BEW 605 K
Manual deburring tool - BEW 605 K
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BEW 605 K
This variant of the proven BIAX hole deburrer has an improved leverage effect due to its shortness so that deburring can take place with little pressure.
Product details Homepage Product request
Manual deburring tool - BEW 606
Manual deburring tool - BEW 606
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BEW 606
This angle-design machine allows you to deburr holes in very difficult-to-reach places, e.g. holes in cross holes, which have to be deburred from the inside. The measurement drawings below show the different head sizes. Adjustable speed from 0 to 600 RPM.
Product details Homepage Product request
Manual deburring tool - BEW 606 K
Manual deburring tool - BEW 606 K
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - BEW 606 K
This variant of the proven BIAX hole deburrer has an improved leverage effect due to its shortness so that deburring can take place with little pressure.
Product details Homepage Product request
Manual deburring tool - KEGH
Manual deburring tool - KEGH
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - KEGH
This handpiece has to be used in combination with high speed flexible shaft HTW45 (030005400) and high speed transmission HTZ 45 (020008910).
Product details Homepage Product request
Manual deburring tool - KGS 27
Manual deburring tool - KGS 27
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Manual deburring tool - KGS 27
KGS 27
To be used with flexible shafts

Technical Data
Order number
020017610
Revolutions per minute [min¯¹]
max. 30.000
Weight [g]
160
Max. tool shank Ø [mm]
6
Connection
Small square (5mm)
Product details Homepage Product request
Piston air motor - AG 90
Piston air motor - AG 90
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Piston air motor - AG 90
This powerful multi-purpose device is perfectly designed for filing, sawing, polishing and cutting. The low-wear piston motor is characterized by its high number of strokes. It is capable of 12,000 strokes per minute at a maximum stroke length of 9 mm. Both can be adjusted by the user, which makes this machine extremely adaptable.

Also available:
- Tool holder with clamping Diameter 3 mm (Order no. 001 974 430), 4 mm (installed, Order no. 001 974 411), 6 mm (Order no. 001 974 443)
- BIAX air supply hose with connectors (Order no. 001 974 552)
- Matching files can be found in our “Accessories” catalogue
Product details Homepage Product request
Rotary vane air motor - MB 20/3 G
Rotary vane air motor - MB 20/3 G
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Rotary vane air motor - MB 20/3 G
This model is particularly suitable for use in mould manufacture, precision tooling and precision engineering. It is characterized by its very favourable purchase and maintenance costs.
* Higher speed of up to 34,000 rpm for finer, more precise work.
* The motor is protected from overloading by an automatic cut-out.
* Restart protection provides a high degree of safety.
* Now even more compact and around 0.3 kg lighter thanks to a new handle Inexpensive to purchase and maintain.
* Safe to operate.
* Cost-effective universal motor in a sturdy plastic shell.
* Automatic cut-out if wear occurs to the carbon brushes
* Soft start.
* Degree of protection: IP 20, Protection class: II Specifically designed for versatile use in mould making.
* Constant speed under load.
* Uses various quick-change hand pieces for milling, grinding, polishing, brushing and filing.
* The machine can be operated standing upright or suspended from a hook.
Product details Homepage Product request
Scraper blade - KL 70
Scraper blade - KL 70
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Scraper blade - KL 70
BIAX clamp holder for blade inserts R 60, R 90, R120, R150

For scraper type HM 10

item number
7004699
Product details Homepage Product request
Scraper tool - BL 10
Scraper tool - BL 10
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Scraper tool - BL 10
BIAX Universal Scraper, light model. Particularly suitable for:* plastic scraping
* standard scraping
* fine scraping
* precision scraping and oil-tight scraping.

Also suitable for dovetail guide rails and prisms in conjunction with special blades.
Product details Homepage Product request
Scraper tool - BL 40
Scraper tool - BL 40
Pneumatic deburring tool
BIAX Schmid & Wezel GmbH & Co. KG
Pneumatic deburring tools
Scraper tool - BL 40
BIAX Universal Scraper, medium-weight model. Particularly suitable for:* plastic scraping
* standard scraping
* fine scraping
* precision scraping and oil-tight scraping.
Also suitable for dovetail guide rails and prisms in conjunction with special blades.
Product details Homepage Product request
Loading ...