Fully electric CNC tube bender for tubes with OD 80 mm, 9 axis with 3D visual graphic programming (VGP3D) Features: • multiradii (up to 8 tools) • bend head with left or right hand bending sense configuration • all the critical machine setting parameters set and managed by the CNC control • Fixed, variable radius and boost bend up to 5.000 kg • High reliability and high productivity • Use of existing tools - low running costs • Real time bend simulation automatically selecting the shortest and most efficient bending cycle to minimize cycle time and reduce cost • Any possible collision points are highlighted and the most practical avoidance routes effected • Axis position is read by absolute encoder eliminating all conventional sensors, increasing reliability, performance and reducing maintenance cost VGP3D Highly innovative 3D Graphic Programming Software dramatically reducing dependence on operator intervention for: • real time bend simulation automatically selecting the shortest and most efficient bending cycle to minimise cycle time and reduce cost • component simulation and feasibility check highlighting any possible collisions • immediate creation and execution of the machine program with twin data input The multi-stack tool mounting facility allows multi radius and variable radius bending to the same tube in a single set up, bends with very little straight between them, even compound bends. Generally used within the automotive and climate control sectors.