Production-related quality assurance and maximum productivity are guaranteed by a correction interface to the machine tool. Customised for your process, the measuring system is suitable for medium and low-volume production.
Your benefit
High availability thanks to extremely solid and durable design
Automation by loading gantry (horizontal design) or robot (vertical design)
Highly flexible due to software measuring sequence and NC clamping devices
Practically rust-free
Pulling and pushing measurements possible
High availability and flexibility without time-consuming setting-up
Outstanding precision even in harsh production environments
No workpiece-specific calibration master required
In-line measuring technology can also be fully integrated as an »in-line« or »post-process« system
The measuring and automation concept BMK 5 is a variable measuring cell that can be expanded with modules. It can perform additional tasks such as sorting, labelling and packaging of components if the corresponding modules are integrated.
Your benefit
Applicable as stand-alone system or as in-line module in a machine tool
Integrated as an in-line system with correction control loop or as an autonomous post-process test system
Pair measurement and sorted storage/pre-assembly
Inspection of workpieces from different machines/spindles using shared measuring station
Flexibly equipped working area
Manual or automated loading/unloading
Adaption of up to 9 measuring and test modules with zero point clamping systems
High efficiency by minimum setup costs
Automated measurement without additional staff assignment
Measuring – testing – automating | complete solutions from a single source
Variants
BMK3
Part handling by 4-axis high-speed robot with vacuum gripper
The range of applications for crack detection testing machines includes 100% testing of safety-critical components such as drive shafts, wheel hubs or brake discs. Non-destructive eddy-current crack testing is performed by a full scan of the relevant areas for testing within the production cycle.
Your benefit
Eco-friendly, fast and fully-automated objective inspection
Reliable identification and discharging of cracked parts
High availability thanks to extremely solid and durable design
Can be fully integrated into the production line
Automation by means of inter-linkage, conveyor, shuttle, robot or gantry
Can be individually extended to accommodate additional test criteria such as shrinkage cavities, pores, etc.
Marking system for OK/NOK identification or individual coding
Typically arrange immediately downstream of the machining station, often combined with a multipoint measuring machine
Also available as measuring system for external control
The multipoint measuring machines are designed for 100% quality monitoring. They provide static and/or dynamic testing, which records all measurement features in a single workpiece rotation under extreme production conditions such as casting dust or temperature fluctuations in the workpiece.
Your benefit
High availability thanks to extremely solid and durable design
Can be fully integrated into the production line
Automation by means of inter-linkage, conveyor, shuttle, robot or gantry
Ultra-precise thanks to optimum use of measuring sensors
100%-measurement with statistical quality control within the production cycle
Precision and reliability, even in harsh production environments
Testing technology with required scope of automation
Also available as measuring system for external control
Measuring – testing – automating | complete solutions from a single source
The multipoint measuring machines for rotationally symmetric workpieces offer quick acquisition of component geometry during dynamic measurement. Loading is possible manually as well as automatically. Its loading position is easy accessible from above right on top of the final measuring position.
Your benefit
Post-process multipoint measuring system with independent PLC
Easy integration into existing automation system
Short, optimised feed motions
Flexibly configurable measuring unit using measuring forks/callipers with intelligent universal clamping system
The test stand series for machine tool spindles combines the know-how of all three business divisions: The innovative test stands are available both as laboratory and end-of-line test stands and enable full testing and evaluation of the spindle quality.
Spindle test stands by Blum-Novotest
End-of-line and development test stands for motor spindles of machine tools
Special measuring and testing systems by Blum-Novotest are specifically adapted to your requirements with regard to workpiece spectrum, measuring/test task and production environment.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.