Boschert
Products
13
Boschert GmbH + Co.KG
Punching machines
Punching Machine TRI
The TWIN/TRI series machines are equipped, respectively with two or three independent punch heads. Either series can be equipped with Revotool, Boschert‘s multi-tool solution. Up to 16 tools in the TWIN series and up to 24 tools in the TRI series allow the working of complex parts without tool change. A distinct advantage of all Boschert CNC punching machines is the user-friendly software. The heavyduty, open C-frame design allows turning of oversized sheets. The powerful software suggests options for automatic repositioning and turning/flipping of large parts.
Punching Machine Eccoline
|
Punching machines
Boschert GmbH + Co.KG
Punching machines
All ECCO Line machines are equiped with 28 t punching pressure (40 t on request) and Trumpf Tooling system.
All models are equiped with:
- constant punching pressure
- maintenance free hydraulic drive
- one stripper holder an plate
- two different stroke length
The ECCO Line earns money with:
- small and medium series
- single pieces and prototypes
Tooling system
The worldwide approved Trumpf tooling system is used on the ECCO Line (other systems on request, e.g. Amada, Rainer, XX28). The tool is put directly into the tool holder without an intermediate case. Through the large propagation of the Trumpf tooling, the machine is virtually always ready for operation.
7 seconds. The largest tool diameter is 105 mm (4"). Besides a wide range of standard toos, it is possible to manufacture arbitrary tool within the range of 105 mm diameter. The metal loss from sharpening will be compensated through changes of the punch stroke length. Exact alignment of cutting tools with ridig clampin
