504,547 active members
4,481 visitors online
Register for free
Login Register
BTT Bosetti Tech Transfer


BTT Bosetti Tech Transfer
Sch”nblick 2
75228 Ispringen

Route planner

Route planner

CNC Turning- and Milling Center MORI SEIKI NZ 1500 T2Y

Basis for negotiation

  • Reference number 1070-100597
    Manufacture Year 2008
    Operation Hours not applicable
  • Metal working machine
  • Lathes
  • Horizontal turning and machining centers
  • standard turning dia.:200
    turning length:810 mm
    control: Fanuc 31 iTA MAPPS 3 Fanuc
    greates pass round over bed:800 mm
    Max. distance between centres:1130 mm
    max. turning diameter:320 mm
    max. workpiecediameter:300 mm
    Traverse X-Axis 1:210
    Traverse X-Axis 2:210 mm
    Traverse Y-Axis 1:110 (+65/-45) mm
    Traverse Z-Axis 1:810 mm
    Traverse Z-Axis 2:810 mm
    Traverse B-Axis:920 mm
    Spindle 1 Power:22/18,5 kW
    Spindle 1 RPM:6000 1/min
    Spindle 1 Torque:223/172/157 Nm
    Spindle 2 power:22/18,5 kW
    Spindle 2 RPM:6000 1/min
    Spindle 2 torque:223/172/157 Nm
    spindle nose:JIS A2-5
    spindle bore:61 mm
    bar material dia.:52 mm
    spindle bearing diameter:100 mm
    C-Axis:0,001° Sp.1 & Sp. 2
    Number of Turrets:2
    Number of driven tools:16 x 2=32 BMT 60 pos
    Turret 1 tool RPM:6000 1/min
    Turret 2 tool RPM:6000 1/min
    power capacity - driven tools:7,5 / 5,5 kW
    turret changing time (4-stations):0,18 sec
    Schank height for square tool:20 mm
    Diameter of boring bar:32 mm
    Rotary tool machining ability:M16 / Ø16 .
    rapid traverse X-axis:30 m/min
    rapid traverse Y-axis:20 m/min
    rapid traverse Z-axis:50 m/min
    memory:MAPPS 50 MB
    Custom Macro, Number of Variables:600
    Linear scale on x-axis:X1
    total power requirement:81,4 kVA
    weight of the machine ca.:8,3 t
    dimensions of the machine ca.:4,0 x 2,8 x 2,4 m
    Memory:128 kB
    Registered Programs:250
    No. of tool offset pairs:99
    spindle load monitor:B
    Tool life management:B 64 Pairs
    Spindle 1 Chuck:Kitagawa BB 206
    Spindle 2 Chuck:Kitagawa BB 206
    Toolholders static:Standard SET
    Tool holders rotary:2 ax / 2 rad
    Interface for coolant through the spindle:Knoll Interface 70 bar
    Direct threading:Spindel 1 & 2
    Coolant through Spindle2 to Chuck:Interface
    Coolant through Spindle1 to Chuck:Interface

    CNC Turning-and Milling Center

    The NZ1500 T2Y has 2 spindles and 2 turrets, the upper turret has Y-axis function and built-in milling motors. This not only allows synchronized machining using 2 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets.
    A high pressure coolant unit Knoll or Frascara can be supplied at extra cost.

Send request

More machines from BTT Bosetti Tech Transfer