. Multicoil electro-permanent system . Parallel small pole pitch throughout the whole width of the chuck . Uniform and strong magnetic field over the whole surface
Included with purchase:
- 3, 6 or 10 meter long cable (length to be chosen) on the short side - Long and short side end stops - Clamps
Use:
o Grinding o EDM o metrology • Nominal force: 110 N/cm² • Pole pitch: o 5 mm o 1 mm of brass o 4 mm of steel • Admissible wear of top plate: 8 mm • Magnetic field height : 5 mm • Voltage: o 340 VDC o 400 VAC
Options:
- Other sizes on request - Electromagnetic execution - Through holes to fix the chuck on the machine table - Cable connection on the long side - Compressed air holes
Twin magnetic system - Silver brazed top plate - Power adjustable
. Uniform and powerful magnetic field, ideal for turning and grinding . Parallel pole pitch . Adjustable holding force . For parts 4mm thick and up
Included with purchase: - 1 Actuating Key
Use: • Grinding • Turning
• Nominal force: 100 N/cm² • Pole pitch:
o 13 mm o 5 mm of brass o 8 mm of steel
• Admissible wear of top plate: 5-8 mm • Magnetic field height: 8-10 mm
Options: - Auxiliary top plate for centering - Machining possible at the rear of the chuck - Fitting adaptors to: . Morse cone 3 or 4 . Short taper flanges for:
. Electromagnetic system . Parallel transversal pole pitch throughout the whole width of the chuck . Uniform and strong magnetic field . Extremely stable construction . Corresponding Control Unit and the Remote Control to be ordered separately: See 50.04.BUE.230 / 50.05.T.BUET.400 and 50.10.T10
Included with purchase:
- 3, 6 or 10 meter long cable (length to be chosen) on the short side - Long and short side end stops - Clamps
Use:
o Grinding o EDM o Machining
• Nominal force: 120 N/cm² • Pole pitch: 13/18/25 mm • Admissible wear of top plate: 8 mm • Magnetic field height: 5/8/10 mm • Voltage: 110 VDC
Options:
- Other sizes on request - Electro-permanent execution - Through holes to fix the chuck on the machine table - Cable connection on the long side - Compressed air holes
. Permanent magnetic chuck with NEODYMIUM magnets . Parallel fine pole pitch with steel + brass . Reinforced actuating mechanism
Included with purchase: - 1 Actuating Key - Long and short side end stops - Clamps
Use : - Grinding - EDM - metrology
Max. temperature of use: 80 °C Nominal force: 120 N/cm² Pole pitch: 2 mm 0,5 mm of brass 1,5 mm of steel Admissible wear of top plate: 6 mm Magnetic field height: 4 mm
Options: - Sine table execution - Fitted to an angle iron - Part of palletizing system: Erowa, 3R, Hirschmann, Vischer & Boli 10-01-800px-5004
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.