464,973 reg. members
CAMTEK
116
Following

CAMTEK 3D SHEET METAL MACHINING

CAMTEK GmbH
CAM software
3D SHEET METAL MACHINING
PentaCut & TubeCut

The modules PentaCut and TubeCut have been developed for the programming of complex laser- and water jet machines with up to 6 simultaneous controlled axes. The powerful PEPS modules for the 2D sheet metal machining stand out because of a very high automation level.

Based on 3D CAD-files the machining is created automatically. A belated optimization of the machining recommendation is possible at any time.

• Automatic position calculation including transformation- and rotation possibilities for theperfect position of the work piece on the machine table.
• Calculation of the linear barriers of the axes
• Fully automated calculation of grid-shaped component and part fixtures
• Fully automated nesting of the parts
• Automatic generation of nc-data to machine part fixtures on a laser- or water jet machine
Product details Homepage Product request
2D SHEET METAL MACHINING
2D SHEET METAL MACHINING
CAM software
CAMTEK GmbH
CAM software
2D SHEET METAL MACHINING
2D Axes Laser-, Plasma- & Water Jet Cutting, Punching

Small numbers of parts, complex part geometry, short delivery times, these all need a quick and effective NC-program solution. The powerful PEPS modules for the 2D sheet metal machining stand out because of a very high automation level. CAD-files are imported and corrected automatically. A fully automated nesting module allows a maximum material utilisation.
Product details Homepage Product request
3D SHEET METAL MACHINING
3D SHEET METAL MACHINING
CAM software
CAMTEK GmbH
CAM software
3D SHEET METAL MACHINING
PentaCut & TubeCut

The modules PentaCut and TubeCut have been developed for the programming of complex laser- and water jet machines with up to 6 simultaneous controlled axes. The powerful PEPS modules for the 2D sheet metal machining stand out because of a very high automation level.

Based on 3D CAD-files the machining is created automatically. A belated optimization of the machining recommendation is possible at any time.

• Automatic position calculation including transformation- and rotation possibilities for theperfect position of the work piece on the machine table.
• Calculation of the linear barriers of the axes
• Fully automated calculation of grid-shaped component and part fixtures
• Fully automated nesting of the parts
• Automatic generation of nc-data to machine part fixtures on a laser- or water jet machine
Product details Homepage Product request
5 AXIS SIMULTANEOUS MILLING
5 AXIS SIMULTANEOUS MILLING
CAM software
CAMTEK GmbH
CAM software
5 AXIS SIMULTANEOUS MILLING
These strategies allow a simultaneous machining of free formed surfaces on 5 axis milling machines.

• 5 axis multi-face simultaneous roughing and finishing
• 5 axis hobbing
• 5 axis impeller milling
• 5 axis channel form milling
• 4 axis rotation and cylindrical surface machining
Product details Homepage Product request
OPTICAM
OPTICAM
Software for development and design
CAMTEK GmbH
CAM software
OPTICAM
OPTICAM is a fully integrated plug-in for the SolidWorks™ CAD system.

CNC programming is based directly on the designed or imported 3D model. Because of the automatic Feature-Recognition and the assignment of integrated machining technologies and strategies, OPTICAM offers a very high automation level and reduces the programming time significantly. After a very short training period a beginner can create an efficient CNC Program with a few clicks, nonetheless an experienced user still has the complete flexibility to interact with in every detail.

Integration in SolidWorks™:
With the OPTICAM-Manager the user can work easily and clearly in his familiar CAD environment.
• Full integration in SolidWorks™
• User friendly interface
• Intuitive user guidance
• Quick access to all relevant information
Product details Homepage Product request
PEPS 2-50 AXES TURNING
PEPS 2-50 AXES TURNING
CAM software
CAMTEK GmbH
CAM software
PEPS 2-50 AXES TURNING
With Turning & Milling & an integrated 3D Machine Simulation the PEPS Turning Module offers a way of machining the complete part.

The integration of the Milling Module into the PEPS Turning module plus a fully integrated 3D Machine Simulation for complex CNC-machines results in a very effective solution to this problem.

PEPS shows a complete 3D Machine Simulation, which allows a simulation of all machining operations, a collision check and optimises the operations. During the Simulation the actual situation of the part can be measured already. This reduces the programming and machining times, is cost effective and collisions are avoided. Milling operations like pocketing, profiling, rest machining, corner clearing, bezel milling or 3D-geometry milling make the turning module became a way of machining the complete part.
Product details Homepage Product request
PEPS 3D WIRE CUTTING
PEPS 3D WIRE CUTTING
CAM software
CAMTEK GmbH
CAM software
PEPS 3D WIRE CUTTING
The advanced capabilities and a user friendly handling make the PEPS Wire Cutting Module the market leader.

SPECIAL MACROS
- Ruled Surface Pocketing
- Partial Pocketing
- Slug Retention
- Arc Manipulation
- Machine separate parts of a profile differently
- Machining on profiles
- Output of profile co-ordinates
Product details Homepage Product request
PEPS CAD MODULE
PEPS CAD MODULE
Software for NC simulations
CAMTEK GmbH
CAM software
PEPS CAD MODULE
The PEPS CAD-module is the basis for all machining modules. In a user friendly interface, which can be adjusted individually, 2D-constructions can be created or manipulated after importing them via the integrated DXF-/DGW- interface.

It provides powerful CAD functions to create, manipulate and repair geometry.

Further functions like
• Dimensioning
• Layers
• Measuring functions and automatic element calculation
• Creation of text

offer the possibility to create and process geometry as comfortable as possible and to optimize the programming. Because of PEPS integrated macro language geometry tasks can be automated and thereby programming times reduce.

This is also optimised by predefined functions like
• the creation of standard geometries via parameter definition
• and various figures via figure creation
Product details Homepage Product request
PEPS MILLING 2.5D
PEPS MILLING 2.5D
CAM software
CAMTEK GmbH
CAM software
PEPS MILLING 2.5D
PEPS 2.5D Milling was developed for the minority of all jobs like profiling, face milling, drilling and grinding.

In combination with the 3D CAD-module - PEPS SolidCAD, 2.5D machining can be applied directly to 3D-data like solids and surfaces. Powerful machining cycles like pocketing, profiling, face milling and drilling and the use of canned cycles allow minimum programming times.
Product details Homepage Product request
PEPS MILLING 3D
PEPS MILLING 3D
CAM software
CAMTEK GmbH
CAM software
PEPS MILLING 3D
PEPS Milling 3D offers powerful machining strategies, which include intelligent HSC-optimized tool path calculations.

A totally structured, dialog based programming allows the user a quick access to the 3D programming with PEPS. The different, available roughing strategies stand out because of many advantages. All machining cycles are also adequate for rest machining.
Product details Homepage Product request