Search:

The heat is surely the problem, i had many of cases like that, i recommend putting an AC unit on the electrical cabinet which is much cheaper than any part of CNC machine.
The main problem is in the...

If you have pneumatic ATC the problem with slow 180 degrees is surely due to worn out seals, had the same problem, and both of the proximity switches (0 degrees and 60 degrees) are located beneath...

THIS ONLY WORKS IF YOUR TOOLCHANGE HEIGHT OF SPINDLE IS GOOD!!!
The solution is very simple, folow this steps:
1. Remove the arm from the ATC unit (only the part that grabs tools - lossen 4 screws...

Does your machine have sensor for orientation?
If no, You can quick check the encoder on the yaskawa controler, open parameter U2-03 (Spindle motor position) and watch if the numbers are changing...

You can download the manual for yaskawa 626VS and check the motor code selection (parameter C1-25 on your yaskawa), when you adjust that parameter to your corresponding motor it will automatically...

The problem is for sure with bios settings, every time you replace the bios battery the bios setting go to default. You have to check and adjust the settings in bios to make work.
But to do so you...

Hi,

1. For transfering files to hurco machines i use FTP client called FileZilla
2. Errror "detected fault overload" is referring to all 3-phase motor protections. they are located in electrical...