[Yussy82]

Hello,

I have a 1993 Mori Seiki SL-25M lathe, and I'm unable to use the G70, G71, and G72 commands. The GRAPH and FAPT buttons on the screen also don’t work. Someone told me that these functions might be disabled through the parameter settings, and that I could enable them via the parameter screen, but I have no idea how to do that. I would really appreciate help from someone experienced with these machines.

Thank you!

[cncmakers001]

Hello,

I have a 1993 Mori Seiki SL-25M lathe, and I'm unable to use the G70, G71, and G72 commands. The GRAPH and FAPT buttons on the screen also don’t work. Someone told me that these functions might be disabled through the parameter settings, and that I could enable them via the parameter screen, but I have no idea how to do that. I would really appreciate help from someone experienced with these machines.

Thank you!

Parameter 5101, bit 0 (RTP)
1 = Canned roughing cycles (G70–G72) enabled
0 = Disabled