Hello!
I've recently build CNC machine with water cooled 2.2 kW spindle and Huanyang HY02D223B as my VFD. Till now I've controlled speed of the spindle with 10K potentiometer on HY02D223B. I would like to start and stop (possibly reverse) the VFD with Mach3. For breakout board I'm using DB25-1025.
I've already set VFD parameters:
Pn 01=24000
Pn 02=400
Pn 03=3
Pn 04=2
Pn 12=400
So I'm interested if someone have some past experiences with this VFD and BOB?
CHIRON Group SE
Forum
PERFORMANCE MEETS PRECISION
1081
Results 1 to 2 of 2
-
02-24-2019, 01:14 AM #1
Registered
- Join Date
- May 2016
- Posts
- 1
How to connect Huanyang HY02D223B to DB25-1025?
-
03-28-2019, 06:38 AM #2
Registered
- Join Date
- May 2013
- Posts
- 14
Re: How to connect Huanyang HY02D223B to DB25-1025?
i don't know how to control the VFD from mach3 but i would like to know how you hook up the 10k potentiometer to your VFD
Reply With QuoteSimilar Threads
-
Huanyang hy02D223B or Askpower A131
By nike_bytom in forum Spindles / VFDReplies: 7Last Post: 02-04-2018, 06:05 PM -
Help with Huanyang HY02D223B
By stevespo in forum Spindles / VFDReplies: 266Last Post: 02-01-2014, 09:42 AM -
Dead Huanyang HY02D223B
By compfranon in forum Phase ConvertersReplies: 1Last Post: 08-08-2010, 01:30 AM -
Huanyang HY02D223B goes POP!
By stevespo in forum Phase ConvertersReplies: 1Last Post: 09-26-2009, 08:12 PM -
Huanyang HY02D223B 2.2Kw VFD
By gillyhyde8888 in forum Phase ConvertersReplies: 7Last Post: 09-12-2009, 12:46 AM
Tags for this Thread
Posting Permissions
