[mark0815]

Hello,

i am trying to get an Omron MX2-2,2kw inverter to work with planet cnc and RS485. I am switching from an working Mesa 7i76e and there the RS485 was really simple, but with planet cnc i have no idea how to get this combination in an usable condition.
I ve read all the tutorial again and again, but nothing worked..

Maybe there is someone with an working configuration for an Omron/Hitachi MX2 ?

Did you find a solution to ge in running by modbus?

[PlanetCNC]

I have one on my machine. I will start studying it and hopefully soon make a tutorial with property files.

[mark0815]

Sounds good. Ist there any chance to get it within September?

[siassia]

Hello!


I replaced my 400Hz HY VFD with a Folinn H110T20037BX0 VFD to use an 800Hz spindle.
here are the two problems that I encounter:


1) - the maximum control frequency is 66 Hz, while with the control panel keyboard I go up to 800 Hz.


2) - I cannot stop the spindle with the M5 command.
M5 sends code 01 06 01 22 00 05 E8 3F
So according to the user manual the stop code is 01 06 01 22 00 10 29 F0.


I attach the 3 expression files.


Thank you in advance for your help.


The manual is here:
https://www.steppermotor.fr/goods-11...roche-CNC.html