Can anyone give me a step by step guide to running a program in AUTO once I've loaded the program into my machine from my computer? Any help would be greatly appreciated.
DMG MORI
Forum
7071
Thread: Okuma Cadet LN8C Lathe
Results 1 to 2 of 2
-
06-01-2023, 07:43 PM #1
Member
- Join Date
- Jun 2023
- Posts
- 47
Okuma Cadet LN8C Lathe
-
06-02-2023, 05:09 PM #2
Member
- Join Date
- Mar 2009
- Posts
- 1982
Re: Okuma Cadet LN8C Lathe
use Okuma chat for that.
Swich to the auto mode. Call the part program to execute. Close ( and lock, if needed - depends on the safety specification ) the work area. Hit the green button.
Bang!
oh, the tools were not set ... sorry...
Joking, of course. The question is wat do you do and what doesn't happen as expected. Do you want someone to tell you how to set the blank to the chuck, how to set tolls, where to set the origin ( serro point ) for the job and so ?
or maybe the problem is with cutting while doors open ?
Reply With QuoteSimilar Threads
-
okuma cadet-w lathe problem with sub spindal
By NathanCollier in forum Community Club HouseReplies: 0Last Post: 01-30-2014, 09:03 PM -
Okuma cadet lathe Z problem
By rob jerico in forum OkumaReplies: 18Last Post: 08-19-2013, 04:22 PM -
okuma LNC-8 cadet lathe with fanuc control
By rob jerico in forum OkumaReplies: 10Last Post: 02-16-2012, 07:45 PM -
Replacement Window for Okuma Cadet Lathe
By wolfram in forum OkumaReplies: 4Last Post: 06-07-2009, 02:52 PM -
okuma cadet lathe osp 5020l
By bryanpackmac in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 02-26-2007, 01:36 AM
Tags for this Thread
Posting Permissions
