WMZ V 300

Small – flexible – precise in the diameter range from 50 to 250 mm, maximum precision in spite of high speed. The module system for reducing unit costs. The modular N1 product platform unites applications from different machining technologies. The benefit for users goes beyond significantly reducing investment costs to include the declared intention of this development: Permanent reduction of unit production costs. PITTLER T&S GmbH, the traditional manufacturer of CNC lathes, has integrated operations such as drilling, thread cutting, counter-sinking, milling, grinding as well as final expanding and burnishing into the N1 platform in addition to turning. The offer is completed by our own integrated quality and process assurance modules as well as material flow components.

Highlights:

01
Parallel and turning machining

02
Flexible workpiece feed from the rear of the machine into the automation room

03
Loading via storage table for up to 45 minutes of standalone processing

04
Automatic part separation – no defined placing of the raw and finished parts necessary

05
NC lift-off holder for brake disc machining

The innovative solution for complete machining of rotationally symmetrical and cubic parts, based on proven designs. The modular concept allows the machine to be produced with 1 or 2 independent spindles and with one or two cross slides. The PV³ combines technologies such as turning, drilling, thread cutting, milling, skiving, grooving or grinding and gear hobbing as well as hard turning and grinding including integrated quality check in a monitored process, all in one machine. Unique, patented tool carriers allow this high application flexibility in the part diameter range from 400 to 1,600 mm.

With two center-drive-heads for simultaneous end machining of shafts with a length up to max. 1.600 mm or with chuck construction for 4-axis turning. The product range V 300 is multifunctional and convenience through short loading and unloading times as well as simultaneous machining with two turrets. The V 300 series is particularly suitable with center-drive-heads if only both ends need to be machined and so the complete machining can be carried out in one clamping.

Highlights:

01
Turning, milling and gear cutting of shafts in only one set-up

02
Simultaneous machining of both shaft ends thanks to center drive technology

03
6-sided machining in main and counter spindle with up to four tool carriers

04
Automatic tool change in 7 seconds due to disc magazine

05
Integrated automation for fast workpiece change