I have the following problem.
The handover of the defined parameter is not considered in the subprogram. What could be the reason for it?
;main program
N1 DEF INT PAR_1, PAR_2
N2
N3 PAR_1=4...
Type: Posts; User: butscheronie
I have the following problem.
The handover of the defined parameter is not considered in the subprogram. What could be the reason for it?
;main program
N1 DEF INT PAR_1, PAR_2
N2
N3 PAR_1=4...
So where is says NUM I have to enter the tool name, don’t I?
And I get the name of the current tool in the spindle with -> $TC_TP2[$TC_MPP6[9998,1]] .
Can you also give me the data for the base??
It’s great that it’s possible to change the traverse paths when measuring but HOW ???
I also need the description and the read out of the parameter for different purposes...
We have an angle head...
Similar to that.
I want to use the tools on the machine without having to measure them.
When the if the new drill is 50mm shorter as the length that is already entered in the tool list, then the...
Hello I have 2 small problems:
1.How can I read out/ change the radius and the length of a particular tool that is still in the magazine (so not in the spindle; of course with parameters in the...
Is there no 30 day trial version to download?????
Under which Siemens parameter can I find the current tool number in the spindle??
I think is something with $........
Thank you!
Can anybody tell where I can download Edgecam free of charge?
Would be really thankful for a few links.
Many thanks in advance
Could anybody tell me, how to program Cimco V5 with vectors or Euler angles?
I'm looking for the spelling.
It would be nice,if anybody's got an example.
Thanks.
At a part 3 points are keyed and the coordination of x-axis and y-axis are saved.
For example:
P1: X=20,458 und Y=10,254
P2: X=33,658 und Y=15,157
P3: X=57,267 und Y=3,682
Anybody here...
Who could send me a link for downloading an adequate trial version of Mastercam?
Someone told me once how to query 2 parameters the same time.
Here it goes:
N52 IF ($P_UIFR[2,X,TR]>282.54) AND ($P_UIFR[2,X,TR]<282.58)
N55 GOTO FRAESEN
N53 ELSE
N54 IF...
I tested it today and it works perfectly!
I would have a much more complicated solution with about 10 lines that would be very confusing.
Thanks a lot!
I’ve got a question concerning the query function “IF THEN”.
I’d like to measure a unit with a calliper after milling.
I make it with 10 measures.
After that a protocol should be created.
The...
I imagined something like this…
I’ll try it out tomorrow.
Thanks for now
Unfortunately I’m not really fit in free contour programming.
Could anybody tell me how it’s possible to program a straight line under an angle with a defined length of 72,8mm (see picture)?
I...