Re: Old Fanuc Tape Cut w0 freezing immediately on bootup with a memory dump screen
We have a W1 and I did have a memory crash not unsimilar to this. In our case the machine booted up but just crashed to memory dump and stayed there, didn't power down. Our problem had to do with the amount of programs in the memory that had been sitting in there for years. Once we emptied the memory it corrected itself. It's possible, in your case, that the memory board has died, but I'm not even close to being an expert so better to have a EDM guy come and have a look at it, if you can.
Otherwise, find someone you can swap a memory board with, that would elinimate that avenue.
Engineer - Artist - Writer