Sieg X2 3 Axis CNC Milling Machine + Tooling

Machine is available for viewing in Sunnyvale, CA 94086 evenings and weekends.

Up for sale is a Sieg X2 Mini Mill retrofitted to CNC with CNCFusion Kit and a high torque 420oz/in Stepper motors. This milling machine has served me well but I have since upgraded to a bigger machine. All the wiring has been done with care and all have quick connect so that the machine is as portable as it gets. The Y axis is modified to increase the travel to allow more working envelope.


Everything in the photos are included in the sale except the bench table. If you really want the table we can discuss. The controller box is fully enclosed, it was open in the photo to show the wiring.

Below are a list of parts used to build this X2 CNC milling machine.

Sieg X2 Milling Machine ($500)
CNCFusion X2 conversion kit ($600)
Longs 420oz/in Stepper motors / Controller / Power ($500)
Oversized low backlash ballnut bearings ($30)
4" Quick Vise ($60)
Clamping kit ($60)

$1750 Total invested and many hours spent on the conversion.

My price is $1350. Your chance to get this at a huge amount of savings both dollars and time.

List Date: 8/11/2014
Location: Mountain View, CA, United States

For more info, click here to view the original listing: Sieg X2 3 Axis CNC Milling Machine + Tooling
--------------------------------------
On Sale For: $1350 (Local Pickup Only)


--------------------------------------