The 8-inch rotary table has a 90:1 gear reduction ratio and turns 4-degrees per revolution so not sure if a smaller size Nema-23 motor with 156 oz /in. of torque would work well that comes with the...
Type: Posts; User: #.0
The 8-inch rotary table has a 90:1 gear reduction ratio and turns 4-degrees per revolution so not sure if a smaller size Nema-23 motor with 156 oz /in. of torque would work well that comes with the...
I'm looking to power an 8-inch rotary table with a handheld motion controller with a Nema-23 motor and have a few questions. Does anyone else manufacture an inexpensive standalone handheld motion...
I did some research and found this lathe to fit under category B of the 2008 tariff schedule commodity code number 8458110030 with a power rating less then 18.65 kW (25 hp) and if it's under $3025...
You're probably right about keeping the factory color and just painting it later if I don't like it.
This company is asking a little over 1600 bucks for the milling machine and around 2000 for the...
You should change your coolant every two to three years or 30000 miles. :D
The aluminum cases dissipate heat better than steel and they won't rust.
Before building your own you might want to check out newegg.com they have some nice looking rack mount cases that might...
I'm starting to believe all this stuff is made in China and just with someone else's name on the front in a different color.
I'm looking to purchase something similar to the Precision Matthews PM9X39 Mill and the PM1236 or PM1340 Lathe.
I have a shipping port located about thirty miles away from my business and I'm not...
I'm in the market for purchasing a new lathe & mill and have been noticing a lot of similarities between equipment brands.
It appears like a few of the brand name models such as Harbor Freight,...