Search:

That’s really simple.
You simply use the roughing cycle "G71".
Simply instead f F/ revolution take F/min.

OFFSET/SETTING
Then you see a screen image with:

Parameter write =0
TV check =0
Output code =0
And so on...

Set the Parameter write enable to ‘1’. The controller will go into an alarm mode...

Operation mode: MDI
But before set the parameter PWE (Parameter write enable) to ‘1’.
(machine goes in alarm status)

Yes, it’s possible!
However you need the option ‘customer macros’- it needs to be available!

What exactly do you want to do?

Here you go

http://wiki.xtronics.com/index.php/Tapers_and_Chuck_keys

AMPCO21 is a pig! :p

I would do it like this:
Mill it on a milling machine or turn in on a turning machine with a self- grinded VHM.

It should work like this
#500=9999
IF [[#3012 GT 060000] OR [#3012 LT 140000]] THEN #501 = #501+1
IF [[#3012 GT 140000] OR [#3012 LT 220000]] THEN #502 = #502+1
IF [[#3012 GT 220000] OR [#3012...

When turning on the control system you should see the number for a few seconds on the screen!

Hello at all,
I've got a question:
is there any possibility to raise the quantity of the possible user variable from currently 20 uo to 30 at CIMCO Edit version 5.02.30 ?

It would be helpful to know, what especially does not work?
Alarms, monitor information...???????

Hello Ulli,
You’ll sure find the unique number somewhere, but I have another solution!
Apply a UGUD variable in the both machines, for example with the name MASCH_NR, and describe it uniquely with...

I’ve always made it with a side milling cutter but there’re lots of roads that lead to Rome.

Concerning depth: take a look at jaws of a lathe chuck and make it by eye ;)

Hello
1/16 is just pitch. It means you’ve got pitch of 1.5875mm.

What machine are you going to use for making of gearing?

Yes, some of us have done it.

Well Andy
There is another solution.
It can be solved from the PLC.
Call me up!

It works!
Thanks!

Hello community
How is it possible to adjust on-position at 840D?
I mean G-codes and transformations that are active in the top right window in the auto mode.
The function CUT2DF is especially...

If it’s so urgent, why don’t you send anything???

Send us what you have!

As far I know, M68 and M69 are clamping and disconnecting of the A-axis or tailstock, aren’t they?!

You should formulate your question better if you’d like to get an answer!

Thanks everybody
I’ll try it tomorrow.

Hello everybody!

One user played with the controller again.
Now the keyboard is set to lowercase.

It’s 840D SL.
Could anybody tell me how it’s possible to change it to only “UPPERCASE”...

I don’t know if this machine has a B-axis. But first and foremost it depends on what and how many axes the machine has.

There’re special acceptance units and you can declare acceptance on your...

Hello

$P_TOOLR is the one you need.

The whole radius of the milling cutter incl. wear stands in R1 with R1=$P_TOOLR.

Hello everybody

Does anybody happen to know a machine manufacturer FEMCO? Yeah, that’s right, FEMCO and not EMCO from Austria.

If someone does, what is your opinion about these machines?
...

Yeah, that might be the reason.
Just check it with 0.001 ticker.

Hello everybody!

I’ve got a problem with SinuCom.

A program that was programmed at machine (Siemens 840D) and saved to a USB stick can’t be opened with SinuCom.
There’s always an error...

Almost the same:

GOTO 2222

2222 is a number of a line but without “N” in the command

Thanks