UHHH ? if I turn off the soft limit home switch and move the machine to home it will hit the frame I have no hardware limits.
or am I not understanding (very likely lol)
Thanks
Type: Posts; User: STK2008STK
UHHH ? if I turn off the soft limit home switch and move the machine to home it will hit the frame I have no hardware limits.
or am I not understanding (very likely lol)
Thanks
OK back all with videos.
So as you can see if I move the Z or Y axis and either one reaches home first then X will stall if its still moving.
If I move Z and Y and either one reaches its hme...
Its not hitting the machine frame honestly the X axis could be in the centre moving towards the home position and if the Z or Y axis reaches home first the X axis will stall its very odd.
As said...
No sorry I never swapped the motors I meant thats the next plan and cabling.
I have only swapped controllers at the moment.
For now I am having to leave it as I need the machine its running fine...
Hi thank you for your reply.
I did swap the drivers over though I have not yet swapped the cabling going to the motor yet thats a bit more involved lol.
Its the noise the motors make when one of...
Sooo
I have lowered the speed of the motors in Mach3 from 60 to 50 (it rounded it down to 49.??? for some reason) and does not do it now but I think this is just masking the real issue?.
I did...
Sorry added pictures :)
Hi all thanks for having me here I shall post some pics of my machine a bit later on but for now was hoping some one might know whats going on.
I have a CNC machine I built many years ago it has...